Comparative Studies of Steel, Bamboo and Glass Fiber as Reinforcing Bars in Concrete Tensile and Flexural Characteristics

Authors

  • Sukant Sahu P. G. Scholar, Department of civil engineering, Babulal Tarabai Institute of Research and Technology, Madhya Pradesh, India Author
  • Ravindra Kumar Raj Assistant Professor, Department of civil engineering, Babulal Tarabai Institute of Research and Technology, Madhya Pradesh, India Author

DOI:

https://doi.org/10.32628/IJSRCE

Keywords:

Deformation, Concrete Beam, Reinforcement, Tensile Strength, Fiber

Abstract

This study comparatively evaluated the flexural performance and deformation characteristics of concrete elements reinforced with bamboo (Bambusa vulgaris), Glass fiber and the twisted steel rebars. The yield strength (YS), ultimate tensile strength (UTS) and the elongation of 9 specimens of the three materials were determined using a universal testing machine. These beams of concrete strength 25 N/mm2  at age 7, 14 and 28 days were separately reinforced with bamboo, glass fiber and steel bars of same percentage, while the stirrups were essentially mild steel bars. It is Determined that out of three which material sample is suitable rebars for non-load bearing and lightweight RC flexural structures also bonding and load-carrying capacity.               

Downloads

Download data is not yet available.

References

Adewuyi, A.P., Wu, Z.S. and Serker, N.H.M.K. (2009) Assessment of Vibration Based Damage Identification Methods Using Displacement and Distributed Strain Measurements. International Journal of Structural Health Monitoring, 443-461. http://dx.doi.org/10.1177/1475921709340964

Adewuyi, A.P., Wu, Z.S. and Raheem, A.A. (2010) Adaptation of Vibration-Based SHM for Condition Assessment and Damage Detection of Civil Infrastructure Systems. LAUTECH Journal of Engineering & Technology, 1-11.

Adewuyi, A.P. and Wu, Z.S. (2011) Vibration-Based Damage Localization in Flexural Structures Using Normalized Modal Macrostrain Techniques from Limited Measurements. Computer-Aided Civil and Infrastructure Engineering, 154-172. http://dx.doi.org/10.1111/j.1467-8667.2010.00682.x

Neville, A.M. (2004) Properties of Concrete. 4th Edition, Addision Wesley Longman, Edinburgh.

Kosmatka, S.H., Kerkhoff, B. and Panarese, W.C. (2003) Design and Control of Concrete Mixtures. 14th Edition. Portland Cement Association, Skokie.

Mehta, P.K. and Monteiro, P.J.M. (2006) Concrete: Microstructure, Properties, and Materials. 3rd Edition. McGraw-Hill, New York.

Downloads

Published

30-09-2021

Issue

Vol. 5 No. 5 (2021): September-October

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

https://creativecommons.org/licenses/by/4.0

How to Cite

Sukant Sahu, & Ravindra Kumar Raj. (2021). Comparative Studies of Steel, Bamboo and Glass Fiber as Reinforcing Bars in Concrete Tensile and Flexural Characteristics . International Journal of Scientific Research in Civil Engineering, 5(5), 123-126. https://doi.org/10.32628/IJSRCE

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

1-10 of 241

You may also start an advanced similarity search for this article.