Utilization of Waste Material in Construction Industry : A Review
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Concrete, GGBS, Cement, Strength, Development, Utilization Of By ProductAbstract
In the modern scenario, desires from concrete have expanded exponentially, different physical parameters of concrete like strength, durability, serviceability and cost needs change i.e. how successfully we can save the cost of cement without bargain the strength and durability of cement [1]. To defeat the inflation, supplementary cementitious material is utilized as a part of conjunction with OPC so that the durability, maintainability and cost effective can be accomplished. In India, 7.8 million ton GGBS as a by-product obtain in the manufacturing in the blast furnace. As the project financial development and improvement in the steel businesses the measure of generation is probably going to increment numerous folds [2-3]. Because of exponential developing in urbanization and industrialization by item from the steel businesses, for example, GGBS is turning into an expanding worry for reusing and waste material. Being a result utilizing it successfully up to some degree fills in as a stage for a green situation and at a same time remembering that the quality of cement doesn't debased by the use of GGBS. In this paper we presenting review of literatures related to experimental investigation of concrete.
Downloads
References
Pooja, Shreenivas Reddy Shahapur, Maneeth PD, Brijbhushan S, “Evaluation of Effect of Steel Fibres on M45 grade of Concrete by Partial Replacement of Cement with Fly ash and GGBS”, International Journal for Research in Applied Science & Engineering Technology, Vol. 5, Issue 8, PP: 1949-1956.
T. Subbulakshmi, B. Vidivelli, K. Nivetha, “Strength Behaviour of High Performance Concrete using Fibres and Industrial by Products”, International Journal of Engineering Research & Technology, Vol. 3, Issue 8, PP: 1219-1224.
Suchita Hirde, Pravin Gorse, “Effect of Addition of Ground Granulated Blast Furnace Slag (GGBS) on Mechanical Properties of Fiber Reinforced Concrete”, International Journal of Current Engineering and Technology, Vol. 5, Issue 3, PP: 1677-1682.
Nandhini. J, Kalingarani. K, “Effect of Hybrid Fibres on Flexural Behaviour of Reinforced Concrete Beams with Blended Cement”, International Journal of Research in Advent Technology, Vol.4, Issue 6, PP: 70-73.
A.M. Shende; A.M. Pande, M. Gulfam Pathan, “Experimental Study on Steel Fiber Reinforced Concrete for M-40 Grade”, International Refereed Journal of Engineering and Science, Volume 1, Issue 1, PP: 43-48.
S.P. Sangeetha, Dr. P.S. Joanna, “Flexural Behaviour Of Reinforced Concrete Beams With GGBS”, International Journal Of Civil Engineering And Technology, Volume 5, Issue 3, PP: 124-131.
Christina Mary V, Kishore CH, “Experimental Investigation On Strength And Durability Characteristics of High Performance Concrete Using GGBS And Msand”, ARPN Journal of Engineering and Applied Sciences, Vol. 10, Issue 11, PP: 4852-4856.
Sowmya. S.M, Premanand Kumbar, R. Amar, “An Experimental Investigation on Strength Properties of Concrete by Replacing Cement with GGBS and Silica Fume”, International Journal of Research, Vol. 1, Issue 8, PP: 148-152.
Sujit V. Patil, N. J. Pathak, “The Experimental Study on Compressive Strength of Concrete using AR Glass Fibers and Partial Replacement of Cement with GGBS with Effect of Magnetic Water”, International Journal of Engineering Technology, Management and Applied Sciences, Vol.4, Issue 8, PP: 21-29.
Prashant Y. Pawade, Nagarnaik P.B., Pande A.M, “Performance of steel fiber on standard strength concrete in compression”, International Journal of Civil and Structural Engineering Volume 2, No 2, PP: 483-488.
Nikhil A. Gadge, S. S. Vidhale, “Mix Design of Fiber Reinforced Concrete (FRC) Using Slag & Steel Fiber”, International Journal of Modern Engineering Research, Vol. 3, Issue. 6, PP: 3863-3871.
T. Subbulakshmi, B. Vidivelli, “Experimental Investigation on the Effect of Industrial by products on the Strength Properties of High Performance Concrete”, Journal of Mechanical and Civil Engineering, Volume 13, Issue 3, PP: 13-21.
Roopa Saira Thomas, Jebitta Fancy Rajaselvi .P, “An Experimental Investigation on the Effects of Concrete by Replacing Cement with GGBS and Rice Husk Ash with the Addition of Steel Fibers”,International Journal of Science and Research, Volume 5, Issue 2, PP: 2104-2109.
Vijay Madhavrao Takekar, G. R. Patil, “Experimental Study of Properties of Fiber Reinforced Concrete using GGBS”, International Journal of Engineering Technology, Management and Applied Sciences, Volume 3, Issue 3, PP: 589-594.
Anusha Suvarna, P.J. Salunke, T.N. Narkehde, “Strength Evaluation of Fiber Reinforced Concrete Using Pozzolanas”, International Journal of Engineering Sciences & Research Technology, Vol. 4, Issue 10, PP: 196-201.
Namani Saikrishna, Syed Moizuddin, “Strength Properties of Steel Fiber Concrete by Partial Replacement of Silica Fume”, International Journal of Research in Advanced Engineering Technology, Volume 6, Issue 1, Jan 2017, PP: 120-124.
Dasari Venkateswara Reddy, Prashant Y. Pawade, “Combine Effect Of Silica Fume And Steel Fiber On Mechanical Properties On Standard Grade Of Concrete And Their Interrelations”, International Journal of Advanced Engineering Technology, Vol.3, Issue I, January, 2012, PP: 361-366.
K. Vidhya, T. Palanisamy, R. Thamarai Selvan, “An Experimental Study On Behaviour Of Steel Fibre Reinforced Concrete Beams”, International Journal of Advanced Research Methodology in Engineering & Technology, Volume 1, Issue 2, March 2017, PP: 178- 183.
Mohammad Panjehpour, Abang Abdullah Abang Ali, Ramazan Demirboga, “A Review For Characterization Of Silica Fume and Its Effects On Concrete Properties”,
International Journal of Sustainable Construction Engineering & Technology, Vol 2, Issue 2, December 2011, PP: 1-7.
Vijay M. Mhaske, Rahul D. Pandit, A. P. Wadekar, “Study on Behaviour on High Strength Crimped Steel Fibre Reinforced Concrete for Grade M90”, Journal of Ceramics and Concrete Sciences, Vol. 1, Issue 3, PP: 1-12.
Subhash Mitra, Pramod K. Gupta and Suresh C. Sharma, “Time- dependant strength gain in mass concrete using mineral admixtures”, Indian Concrete Journal, Vol. 1, Issue 3, November, 2012, PP: 15-22.
A. Annadurai, A. Ravichandran, “Flexural Behaviour of Hybrid Fiber Reinforced High Strength Concrete”, Indian Journal of Science and Technology, Vol 9, Issue 1, Jan 2016, PP: 116-122.
Ram Kumar, Jitender Dhaka, “Review Paper on Partial Replacement Of Cement With Silica Fume And Its Effects on Concrete Properties”, International Journal For Technological Research In Engineering Volume 4, Issue 1, September-2016, PP: 83-85.
Neeraja, “Experimental investigation of Strength Characteristics of Steel Fiber Reinforced Concrete”, International Journal of Scientific & Engg. Research, Vol-4, Issue-2, PP: 89-94.
Vikrant S. Variegate, Kavita S. Kene (2012), “Introduction to Steel Fiber Reinforced Concrete on Engineering Performance of Concrete” International Journal of Scientific & Technology Research Volume 1, Issue 4, PP: 54-61.
M. V. Mohod, “Performance of steel fiber reinforced concrete” International Journal of Engineering and Science, Vol. 1, issue 5, PP. 01 – 04.
ISO 901:20089, “International Organisation for Standard”.
ASTM A-820, “Standard Specification for steel fiber reinforce concrete”, 2011.
M.S.shetty {Book},”concrete technology (theory and practice)”, 2011.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
