Analysis of a High-Rise Building Frame Considering Wind Pressure Considering Steel RCC composite structure using ETABS
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Lateral Laod, Structure, Wind Pressure, Composite, Moments, Displacement, OptimizationAbstract
Tall structures and innovative architectural designing are now a days on trend. every one want beautifull design with safety parameters in a high rise building. For creating such beautiful structures architects and structural engineers always keep safety and structural stability first to avoid any hazadious situation or collapse of structure. Thus in this study we are presenting a technique of structure where we can consider both safety as well as innovative design.
As we all known that composite structures are now a days In trend to enhance structural strength and stability therefore in this present work we are considering a symmetrical building frame of G+10 and assigning lateral load i.e. wind load for a selected region of wind speed 39 m/s. I this study we are considering two cases RCC building and Composite structure and comparing both in terms of forces, displacement, moment and cost effectiveness using analysis tool ETABS.
In this study it is concluded that composite structure is relatively more stable and economical than RCC structure as it resist 30% more forces and displacement.
Downloads
References
Radomir Folić, Vlastimir Radonjanin,et.at(2016)[ DESIGN AND ANALYSIS OF STEEL-CONCRETE COMPOSITE STRUCTURE] University of Novi Sad, Faculty of Technical Sciences, Department of Civil Engineering Novi Sad, Serbia.
Brian Uy (2012)[Recent Innovations for Steel and Composite Steel-Concrete Structures in Australia]CIES, Volume II
Vinay Damam(2016)[DESIGN OF STEEL CONCRETE COMPOSITE STRUCTURE AS COMPARATIVE WITH REINFORCED CONCRETE STRUCTURE BY ADAPTING STAAD. PROV8I], IJESMR, [Damam*, 3(1):January, 2016]
D. Datta(2016)[Steel-Concrete Composite Construction – New Trend in India], IOSR Journal of Mechanical and Civil Engineering, e-ISSN: 2278-1684, p-ISSN: 2320–334X
Alessandro Zona; Michele Barbato et.at. (2008)[ Nonlinear Seismic Response Analysis of Steel–Concrete Composite Frames], 0.1061/_ASCE_0733-9445_2008_134:6_986
LIU Jingbo and LIU Yangbing(2008)[ SEISMIC BEHAVIOR ANALYSIS OF STEEL-CONCRETE COMPOSITE FRAME STRUCTURE SYSTEMS] The 14th World Conference on Earthquake Engineering October 12-17, 2008, Beijing, China
Bhavin H. Zaveri , Jasmin A. Gadhiya et.at(2016)[ A Review on the Comparative Study of Steel, RCC and Composite Building] , IJIRSET, Vol. 5, Issue 1, Januray 2016
RAHUL PANDEY(2014)[Comparative Seismic Analysis of RCC, Steel & Steel-Concrete Composite Frame] National Institute of Technology, Rourkela – 769008
Trilok Gupta and Ravi K. Sharma(2015)[STEEL CONCRETE COMPOSITE STRUCTURES: STATE OF ART], International Journal of Latest Research in Science and Technology, Volume 4, Issue 2: Page No149-153, March-April 2015
Muhammed Sabith K & Dr. Sabeena M. V.(2017)[Seismic Analysis of Irregular Composite Structures with Shear Connectors using ETABS] 2017 IJSRSET | Volume 3 | Issue 3 | Print ISSN: 2395-1990 | Online ISSN : 2394-4099
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
