Design and Analysis of a Pre-Engineered Warehouse Building Considering Lateral Load Using Etabs

Authors

  • Anuj Kumar Anuj Kumar,Department Of Civil Engineering, Millennium Institute of Technology & Science, Bhopal, Madhya Pradesh, India Author
  • Afzal Khan Afzal Khan, Department Of Civil Engineering, Millennium Institute of Technology & Science, Bhopal, Madhya Pradesh, India Author
  • Vikas Patidar Vikas Patidar, Department Of Civil Engineering, Millennium Institute of Technology & Science, Bhopal, Madhya Pradesh, India Author

DOI:

https://doi.org/10.32628/IJSRCE

Keywords:

Steel Structure, Conventional Steel Building (CSB), Pre Engineered Building (PEB), Bracing Systems, Wind Analysis, Cross Bracing, Diagonal Bracing, K-Bracing

Abstract

Pre Engineered Building (PEB) is a concept of performing optimization of
structures providing economical design. Steel is a tensile material which
provide more strength and available in sections as per requirements. These
sections are utilize in pre-engineering building. As per Indian standard I.S
8020:2007 code is prescribed for designing of steel structures. Based on
limit state design. P.E.B. structures are high in demand as compared to
conventional structure i.e Conventional Steel Building (CSB). CSB design
concept is comparatively more easy in fabrication and provide easy
restoration. Steel structures are generally utilized in long span structures
such as industrial buildings where gantry cranes are installed. Steel
structures are easy to assemble in any place as compared to RCC structure
where cost and time both are high in comparison. PEB building structure is
in demand as it requires less time and provide proper strength.
Industrial structures also associate high dead load as it provides residence
to heavy sized members. Therefore, this is necessary to investigate seismic
response of buildings with various bracings and dampers to control
vibration, lateral displacement and storey drift. Natural time period,
frequency, roof displacements are the major parameters considered for
observing response of structures. Response spectrum analysis of 3D
industrial structure with distinct concentric bracings and dampers using
SAP 2000 will be carrying in this research under respective base shear . In this study we are comparing different segments of building structure
where analysis is performed considering lateral loading condition.
              

Downloads

Download data is not yet available.

References

He, K. (2020) The application of BIM technology in building structure design. Engineering Technology Research, 5:203-204.

Mo, D., Wang, H. (2020) Research on application of BIM technology in prefabricated steel structure residence. China Construction Metal Structure, 6:44-49.

Hu, G., Li, S.Y., Pan, J.H., Li, H.M., et al. (2020) Construction technology of hydraulic overall synchronous lifting of super-large-span steel structure roof based on BIM+finite element technology. Building Construction, 42:727-729.

Huang, W. (2020) The application of BIM technology in the optimal design of super high-rise complex outer frame giant column steel structure joints. Smart City, 6:216-217.

Zhang, H. (2020) Numerical simulation study on the stability of surrounding rock structure with thick and hard roof along the goaf. China Resources Comprehensive Utilization, 38:72-75.

Tabish Izhar, Juthika Nayak and Neha Mumtaz, [Comparative Study between Pre-Engineered RCC Structure and Usual RCC Structure], International Journal for Scientific Research & Development| Vol. 5, Issue 02, 2017.

B.Meena Sai Lakshmi, M. K. M. V. Ratnam and M. K. S. S. Krishna Chaitanya, [Comparative Study of Pre Engineered and Conventional Steel Building], INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY, August 2015 | IJIRT | Volume 2 Issue 3 | ISSN: 2349-6002.

G. Durga Rama Naidu, K. Srinivasa Vengala Rao, V. Divya Sri, M. Navakanth and G.V. Rama Rao, [Comparative Study of Analysis and Design of Pre-Engineered Buildings and Conventional Frames], International Journal of Engineering Research and Development, Volume 10, Issue 9 (September 2014), PP.33-41.

Swati Wakchaure and N.C.Dubey, [Design and Comparative Study of Pre-Engineered Building], International Journal of Engineering Development and Research, 2016 IJEDR | Volume 4, Issue 2 | ISSN: 2321-9939.

Rakesh Dumaru, Hugo Rodrigues and Humberto Varum, [Comparative study on the seismic performance assessment of existing buildings with and without retroft strategies], International Journal of Advanced Structural Engineering (2018) 10:439–464.

Downloads

Published

09-12-2021

Issue

Section

Research Articles

How to Cite

Anuj Kumar, Afzal Khan, & Vikas Patidar. (2021). Design and Analysis of a Pre-Engineered Warehouse Building Considering Lateral Load Using Etabs . International Journal of Scientific Research in Civil Engineering, 5(6), 105-110. https://doi.org/10.32628/IJSRCE

Most read articles by the same author(s)

Similar Articles

1-10 of 395

You may also start an advanced similarity search for this article.