Retrofitting of an Existing Box Type Culvert using NDT and Analysis Tool Staad.Pro

Authors

  • Singasan Singh Department of Civil Engineering, S.V.N. University, Sagar, Bhopal, Madhya Pradesh, India Author
  • P. C. Diwan Department of Civil Engineering, S.V.N. University, Sagar, Bhopal, Madhya Pradesh, India Author

Keywords:

Discharge, Staad.pro, Retrofitting, N.D.T., Culvert, I.R.C. loading, Cost Analysis

Abstract

As India is a developing nation which requires a good flow of transportation by means of road, air, rail and water for its proper and easy connectivity. For study we determine its present strength using N.D.T. test (rebound hammer) than we use analysis tool staad.pro to determine the best way of strengthening the structure by retrofitting technique using its existing strength and determine the variation in strength after retrofitting. Here I concluded that with the help of retrofitting technique we can provide strength and justify that staad.pro helped in implementing strengthening technique with present discharge rate and loadings without affecting the structure.              

Downloads

Download data is not yet available.

References

IRC 6, Standard specification and code of practice for road bridges section II Loads and stresses, The Indian Road Congress, (1996).

IRC:5,“Standard Specifications and Code of Practice for Road Bridges”, Section I,(1998).

IRC:21, “Standard Specifications and Code ofPractice for Road Bridges”, Section III,(2000).

Kim K., Yoo C. H, Design Loading For Deeply Buried Box Culverts, IR-02-03, Highway Research Center, Auburn University,Alabama (2002).

B.N.Sinha and R. P.sharma, Analysis of Box culvert by Stiffness Method, journal of Indian Road Congress, Paper No. 555, PP. 189-219, (2009).

Kalyanshetti M.G and Malkhare S.V, Analysis of box culvert by considering soil structure interaction, Paripex- Indian journal of research, Vol. 1, Issue 4, PP.71-74, (2012).

Chen S. S, Harik I. E, Dynamic Effect of a Moving Truck on a Culvert, (2012), JournalOf Bridge Engineering, Vol. 17, 02, p 123-129.

Kattimani K. S, Shreedhar R, Parametric Studies Of Box Culvert, (2013), International Journal of Research in Engineering andScience, Vol. 1, 01, p. 58-65.

Downloads

Published

15-06-2019

Issue

Vol. 3 No. 3 (2019): May-June

Section

Research Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

https://creativecommons.org/licenses/by/4.0

How to Cite

Singh, S., & Diwan, P. C. (2019). Retrofitting of an Existing Box Type Culvert using NDT and Analysis Tool Staad.Pro . International Journal of Scientific Research in Civil Engineering, 3(3), 26-31. https://ijsrce.com/index.php/home/article/view/IJSRCE19335

Similar Articles

1-10 of 238

You may also start an advanced similarity search for this article.