Analysis of Deck Type Bridge Considering Vehicular Loading Using Analysis Tool STAAD.PRO
Keywords:
Bridge, Deck, IRC, Stresses, Staad.pro, Analysis, Structure, Forces, DeflectionAbstract
Bridge is an important structure required for the transportation network. Now a day with the fast innovation in technology the conventional bridges have been replaced by the cost-effective structured system. For analysis and design of these bridges the most efficient methods are available. Different methods which can be used for analysis and design are AASHTO, Finite element method, Grillage and Finite strip method. In this study Deck type bridge is analyzed considering UHPC concrete and NaOH treated concrete for vehicular load as per I.R.C. specifications using analysis tool Staad.pro and Beava. Here it is observed that utilizing UHPC concrete results in economic structure with stability and minimum observation of forces, displacement, moment and cost.
Downloads
References
guohui cao, karthiga p, elavenil s, kmp d. A comparison of road over bridge and rail over bridge. The iup journal of structural engineering. 2018.
neelandharan, shetty rs, prashanth mh, channappa tm, ravi kumar cm. Information vibration suppression of steel truss railway bridge using tuned mass dampers.
luke j. Xueyi l, pingrui z, feng dm. Advances in design theories of high-speed railway ballastless tracks. Key laboratory of high-speed railway engineering, southwest jiaotong university, chengdu, china. 2017
alaa hussain wakar s. Chee luo, progress in high-speed train technology around the world. Transport bureau, the ministry of railways of china, beijing, china. Traction power state key laboratory, southwest jiaotong university, chengdu 610031, china a. Astaneh a. Progressive collapse of steel truss bridges, the case of i-35w collapse, asla a university of california, berkeley, usa 2017.
bridge rules (railway board). Rules specifying the loads for design of super structure and substructure of bridges and for assessment of the strength of existing bridges.
indian railway standards-steel bridge code indian railway standard code of practice for the design of steel or wrought iron bridges carrying rail,road or pedestrian traffic.
irc: 6-2014 section –ii (loads and stesses) standard specifications and code of practice for road bridges.
irc: 21 section –iii cement concrete (plain and reinforced) standard specifications and code of practicefor road bridges.
xiaoyan lei1 and bin zhang, analysis of dynamic behavior for slab track of high-speed railway based on vehicle and track element, journal of transportation engineering © asce / april 2011 / 227.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
