Parametric Effect on Sand Casting Process in Multi Material
Keywords:
Casting Process, Non-Metallic Multi-Material, Solidification Time, Mold Filling Time, HMAAbstract
Bituminous mixes are most commonly used all over the world in flexible pavement construction. It consists of asphalt or bitumen (used as a binder) and mineral aggregate which are mixed together, laid down in layers and then compacted. Under normal circumstances, conventional bituminous pavements if designed and executed properly perform quite satisfactorily but the performance of bituminous mixes is very poor under various situations. Today’s asphaltic concrete pavements are expected to perform better as they are experiencing increased volume of traffic, increased loads and increased variations in daily or seasonal temperature over what has been experienced in the past.
Downloads
References
Prof. Yogini S. Jadhav, Roshni H. Bajgude, Prerana R. Gore, Priyanka P. Lonkar ; A review on yield improvement in gating system; 2017 IJEDR | Volume 5, Issue 2 ;pg. 215-219
Siva. T, Melkin. M.S. and Yugendra Rajan. D; 2016; Experimental analysis of cylindrical riser design for LM6 Aluminium Alloy castings; IJLERA; ISSN: 2455-7137; volume-01,issue-03, june-2016, PP-54-63.
Mayank Dev Singh, Swati Singh, Derasari Keyur, Soni Saumil, Patel Niki, Panchal Harshal; Overall Productivity Improvement In Casting Industry By Using Various Industrial Engineering Techniques; International Journal Of Innovative Research In Science, Engineering And Technology issn(Online): 2319 – 8753; Vol. 4, Issue 1; January 2015;Page(18713-18721)
Nadiah Ahmad; Riser Feeding Evaluation Method For Metal Castings; Pg(1 141);2015.
C.M.Choudhari, B.E.Narkhede And S.K.Mahaajan, Methoding And Simulation Of Lm 6 Sand Casting For Defect Minimization With Experimental Validation, Global Congress On Manufacturing And Management , Vol 12, Pp.1145- 1154,2014
Shruthi Y C, Ramachandra C G, Veerashekhar M; Productivity Improvement of Castings, Switching To Shell Mould Process from Green Sand Mould Process; Ijret; Volume: 03 Issue: 05 | May-2014; Pg-594-598
Raghwendra Banchhor, S.K. Ganguly ; Optimization In Green Sand Casting Process For Efficient, Economical And Quality Casting; Banchhor Et Al., International Journal Of Advanced Engineering Technology E-Issn 0976-3945, Int J Adv Engg Tech/Vol.V/IssueI/Jan.-March,2014/25-29
Manikanda Prasath K; Optimal Riser Design In Sand Casting Process Using Genetic Algorithm; International Journal Of Scientific & Engineering Research, Volume 5, Issue 5, May-2014 371 ISSN 2229-5518;Page(371-374.
Naveen Hebsur, Sunil Mangshetty ; Casting Simulation for Sand Casting of Flywheel; IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ; Volume 11, Issue 4 Ver. VII (Jul- Aug. 2014), PP 37-41.
Renish M Vekariya and Rakesh P Ravani; 2013; Investment casting process using fuzzy logic modelling; IJMERR; ISSN2278-0149, Vol. 2.
Mayank Dev Singh, Raval Apurv J, Patel Dhaval G, Parth Varmora J; Overall Productivity Improvement in casting and Fastening Industry; International Journal of Mechanical and Production Engineering, Issn:2320-2092; Volume-1;July-2013;Page(43-48).
Ike Sowden, George Currier; Improving Casting Integrity Through The Use Of Simulation Software And Advanced Inspection Methods; Proceedings Of The 2012 Joint Rail Conference Jrc2012; April 17-19, 2012;Page(1-7)
Tomas Maudera, Čeněk Šanderaa, Josef Štětinaa, Miloš Masarikb; A Fuzzy Logic Approach For Optimal Control Of Continuous Casting Process; 23. - 25. 5. 2012.
Dr.Eman J. Abed; The Influence of Different Casting Method on Solidification time and Mechanical Properties of Al-Sn Castings; International Journal of Engineering & Technology IJET-IJENS Vol: 11;pg 26-33(2011).
N. Ukrainczyk, S. Kurajica, and J. Šipušiæ; 2010; Thermophysical Comparison of Five Commercial Waxes as Latent Heat Storage Materials; Biochem. Eng. Q. 24 (2) 129–137.
M. Enamul Hossain, Chefi Ketata, 2009; Experimental Study Of Physical And Mechanical Properties Of Natural And Synthetic Waxes Using Uniaxial Compressive Strength Test; International Conference on Modeling, Simulation and Applied Optimization Sharjah, U.A.E January20-22;pg1-5.
R. Tavakoli, P. Davami; Optimal Riser Design in Sand Casting Process with Evolutionary Topology Optimization; Struct Multidisc Optim (2009).
Juan J. Valencia; Peter N. Quested; Thermo physical Properties; Volume 15; 2008; p 468-481.
Gang Pu, Jinfeng Wang, Steven J. Severtson; 2007; Properties of Wax/Montmorillonite Nano composite Coatings; NSTI-Nanotech ; Vol. 2, 2007;pg112-115
Mohamed Ibrahim Shukri , And Adil Mohamed Elbasheer; An Expert System For Designing Gates And Risers For Small And Medium Size Castings ; Sudan Engineering Society Journal; Volume 52; May 2006;Page (39-47).
Mark Jolly; Prof. John Campbell’s Ten Rules for Making Reliable Castings; JOM; 2005; pg-19-28.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 P. Pankaj Kumar, Mr. Vikas Gadpale (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
