Seismic Analysis of A 3 Dimensional High Rise Building Frame Considering Transfers Slab Using Analysis Tool Staad. Pro A Review
Keywords:
Transfer Slab, Static Analysis, Seismic Analysis, Bending Moment, Axial Force, High-Rise BuildingAbstract
This study presented a seismic analysis of a high rise building with a transfer floor. Two structural models of high rise buildings were analyzed using static analysis method. The models were analyzed using structural software for building analysis STAAD.Pro software. The analyzed models had transfer slab system at ground floor levels in high rise building. The numerical analysis is carried out to investigate which floor system improves the global behavior of structure. For this seismic response of buildings such as bending moment and shear force were numerically evaluated. In this study, two different structural models of G+14 storey building had studied by providing a transfer slab at the bottom most storey of the building. The seismic response of high rise building such as storey shear, bending moment, displacement, axial force and torsion were numerically evaluated.
Downloads
References
Vikas V.Mehetre and V.T.More, [Behavior of Transfer Girder for Different Shear Wall Locations], International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 3, Issue 4, April 2018.
Dr. Suchita K. Hirde and Prasanna R. Bhosale, [Effect of Sequential Construction on Multi Storeyed Building], International Journal of Engineering Technology Science and Research IJETSR, ISSN 2394 – 3386 Volume 5, Issue 3 March 2018.
Shweta S. Bhade and R. A. Dubal, [Construction Sequence Analysis and Conventional Lumped Analysis considering P-Delta Effect by Using Etabs], International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653, Volume 9 Issue VII July 2021.
Mohamed I. Metwally, Adel G. El-Attar and Ahmed A. Elansary, [OPTIMUM LOCATION OF OUTRIGGERS IN REINFORCED CONCRETE BUILDINGS WITH TUBE IN TUBE SYSTEM USING STAGEDCONSTRUCTION ANALYSIS], International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 11, Issue 8, August 2020, pp. 335-347.
Vishal N, Ramesh Kannan M and Keerthika L, [Seismic Analysis of Multi-Storey Irregular Building with Different Structural Systems], International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-6, March 2020.
Aayushi Chawla, Deepti Surana and Dr. Vijay Rode, [COMPARATIVE STUDY OF CSA AND LSA OF RCC BUILDING WITH EXTERNAL AND INTERNAL FLOATING COLUMN RESTING ON RCC TRANSFER GIRDER], International Journal of Engineering Research and Reviews, Vol. 8, Issue 3, pp: (11-18), Month: July - September 2020.
Juttuka Vinay Kumar, B. Prudhvi Rani and N.C Anil, [Construction Stage Analysis on Mesh Tube Structural System Building], International Journal of Research Publication and Reviews, Vol 3, no 11, pp 2718-2720 November 2022.
G.C. Balaji and S.S.Vivek, [Construction sequence analysis of multi-storey setback building placed in slope with p-delta and time-dependent effects], Revista de la Construcción 2022, 21(2) 408-426.
Santosh Panigrahi, Dr. Vikram Patil, Madan S. H and Somanagouda Takkalaki, [Importance of Construction Sequence Analysis in design of High Rise Building], IJISET - International Journal of Innovative Science, Engineering & Technology, Vol. 6 Issue 4, April 2019.
M.U. Bhati and N.L. Shelke, [CONSTRUCTION SEQUENCE ANALYSIS AND CONVENTIONAL LUMPED ANALYSIS CONSIDERING P-DELTA EFFECT BY USING ETABS], International Journal of Creative Research Thoughts (IJCRT), Volume 8, Issue 7 July 2020 | ISSN: 2320-2882.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Karan Patel, Ankita Singhai, Rahul Satbhaiya (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
