A Comparative Analysis by Experimental Investigations on Normal and Ground Ultrafine Mineral Admixtures in Arresting Permeation in High-Strength Concrete
Keywords:
Silica Fume, Fly Ash, Compressive Strength, Flexural Strength, Split Tensile StrengthAbstract
In this growing world there has always been a strong competition in the market amongst industries in term of economy, profits, shares etc. one such industry is construction industry where concrete is the key building substance which is in limelight. Since past, we have seen much advancement in concrete because of the research which is in progress on concrete to come out with a product which should be economical and strong enough to resist all kind of loads. In this thesis, fly ash and silica fume are used as a replacement for cement along with steel fibers by volume of concrete. Here, fly ash is replaced by 0%, 15%, 30% and silica fume is replaced by 0%, 6%, 12% and 18% for cement. Initially, a set of concrete specimens were casted with 0%, 15%, 30% fly ash and 0%, 6%, 12% and 18% silica fume with 0% addition of steel fibers and tested for compressive, flexural and split tensile strength. Secondly, another set of concrete specimens were casted with 0%, 15%, 30% fly ash and 0%, 6%, 12% and 18% silica fume with 0.5% addition of steel fibers and tested for the same. Similarly, another set of samples were casted 0%, 15%, 30% fly ash and 0%, 6%, 12% and 18% silica fume with 1% addition of steel fibers and tested to determine the mechanical properties of concrete. And it was observed that maximum compressive, flexural and split tensile strength was attained at 15% fly ash and 12% silica fume with 1% steel fiber.
Downloads
References
S.Vijiyarani S.Sudha,“ Disease Prediction in Data Mining Technique– A Survey”, International Journal of Computer Applications & Information Technology Vol. II, Issue I, January 2013.
K. Priyadarshini and Dr. I. Lakshmi, “A Survey on Prediction of Diabetes Using Data Mining Technique”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 6, Special Issue 11, September 2017, pp. 369-373.
Assal, J. P., and L. Groop, "Definition, diagnosis and classification of diabetes mellitus and its complications." World Health Organization, pp. 1-65, 1999.
B. Senthil Kumar and Dr. R. Gunavathi, “A Survey on Data Mining Approaches to Diabetes Disease Diagnosis and Prognosis”, International Journal of Advanced Research in Computer and Communication Engineering, Vol. 5, Issue 12, December 2016, pp. 463-467.
Xingquan Zhu, Ian Davidson, “Knowledge Discovery and Data Mining: Challenges and Realities”, ISBN 978- 1-59904-252, Hershey, New York, 2007.
Joseph, Zernik, “Data Mining as a Civic Duty – Online Public Prisoners Registration Systems”, International Journal on Social Media: Monitoring, Measurement, Mining, vol. - 1, no.-1, pp. 84-96, September2010.
Zhao, Kaidi and Liu, Bing, Tirpark, Thomas M. and Weimin, Xiao,”A Visual Data Mining Framework for Convenient Identification of Useful Knowledge”, ICDM '05 Proceedings of the Fifth IEEE International Conference on Data Mining, vol.-1, no.-1,pp.- 530- 537,Dec 2005.
Nikita Jain and Vishal Srivastava, “DATA MINING TECHNIQUES: A SURVEY PAPER”, IJRET: International Journal of Research in Engineering and Technology, Volume: 02 Issue: 11 | Nov-2013, pp. 116-119.
Anusha N, Rajashree and Srikanth Bhat K, “A Survey on Medical Data by using Data Mining Techniques”, International Journal of Science, Engineering and Technology Research (IJSETR) Volume 7, Issue 1, January 2018, pp. 11-17.
D.Usha Rani, “A Survey on Data Mining Tools and Techniques in Medical Field”, International Journal of Advanced Networking & Applications (IJANA) Volume: 08, Issue: 05, 2017, Pages: 51-54.
Thiyagarajan C, Dr. K. Anandha Kumar and Dr. A. Bharathi, “A Survey on Diabetes Mellitus Prediction Using Machine Learning Techniques”, International Journal of Applied Engineering Research, Volume 11, Number 3, 2016, pp. 1810-1814.
D. Yu, and L. Deng, 2011, “Deep learning and its applications to signal and information processing,” IEEE Signal Process. Mag., vol. 28, no. 1, pp. 145-154
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
