Analysis of Circular Elevatd Water Tank with Slant Columns Considering Hydrostatic Load
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Water Tank, Elevated, Sloping Columns, Staad.pro, Hydraulic Pressure, Lateral ForceAbstract
<p>Water tanks are the storage units of water which are used for distribution. Water tanks are constructed at high heads to distribute the water with the effect of gravity. These are mainly used for serving drinking water for highly populated areas of metropolitan urban communities in cities and towns. Water is the basic essential requirements for all living organisms in world. Frame works, transportation of inflammable fluids and chemicals. After tanks are used for water supply, firing. In this project work we are proposing circular elevated water tank considering slant height of 0o, 2o, 4o, 6o, 8o, 10o and 12o slope using analysis tool staad.pro. In this study we are considering hydraulic pressure as per I.S. 3370 L.S.M. and lateral forces.</p>
Downloads
References
M. Bhandari and Karan Deep Singh, [Economic Design of Water Tank of Different Shapes With Reference To IS: 3370 2009], International Journal of Modern Engineering Research, ISSN: 2249–6645, Vol. 4 | Iss. 12 | Dec. 2014.
Santosh Rathod and M. B. Ishwaragol, [Analysis of overhead water tank with different staging height and base width], International Research Journal of Engineering and Technology, Volume: 05 Issue: 06 | June-2018.
Tiruveedhula Chandana and S.V. Surendhar, [Comparative Seismic and Cost Analysis of RCC Circular, Rectangular and Intze Elevated Water Tank], International Journal of Innovative Technology and Exploring Engineering (IJITEE), ISSN: 2278-3075, Volume-8 Issue-8, June, 2019.
J.Karol Argazinski, José Alex P. Sant’Anna and Marcos R. Tristante, [Fluoropolymers for the Chemical Processing Industry Applications], INTERCORP ABRACO 2010.
Dona Rose K J, Sreekumar M and Anumod A S, [A Study of Overhead Water Tanks Subjected to Dynamic Loads], International Journal of Engineering Trends and Technology (IJETT) – Volume 28 Number 7 - October 2015.
Shivkumar Hallale, Tushar Deshmukh, Swapnil Manjramkar, Riyaj Sayyad and Digvijay Makode, [Seismic Behavior of Overhead Circular Water Tank with Shear Wall using STAAD PRO], International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887, Volume 6 Issue VI, June 2018.
P.L.N. Saroja and Vanka. Srinivasa Rao, [Comparative Study of Seismic Analysis of Existing Elevated Reinforced Concrete Intze Water Tank Supported on Frame Staging], International Journal of Constructive Research in Civil Engineering, Volume 2, Issue 1, 2016, PP 10-21.
Manoj Nallanathel, Mr. B. Ramesh and L. Jagadeesh, [DESIGN AND ANLYSIS OF WATER TANKS USING STAAD PRO], International Journal of Pure and Applied Mathematics Volume 119, No. 17 2018, 3021-3029.
Prashant A Bansode and V. P. Datye, [Seismic Analysis of Elevated Water Tank with Different Staging Configuration], Journal of Geotechnical Studies, Volume 3 Issue 1, 2018.
Krishna Rao M.V, Rathish Kumar. P and Divya Dhatri. K, [SEISMIC ANALYSIS OF OVERHEAD CIRCULAR WATER TANKS – A COMPARITIVE STUDY], International Journal of Research in Engineering and Technology, Volume: 04 Special Issue: 01 | NCRTCE-2014 | Feb-2015.
RAMAKRISHNA HEGDE, YOGESH G and SANJAY CHAWHAN, [COMPARATIVE STUDY ON RECTANGULAR AND CIRCULAR WATER TANK USING STAAD PRO SOFTWARE], International Research Journal of Engineering and Technology, Volume: 05 Issue: 11 | Nov 2018.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
