Analysis of a 3-Dimensional Building Frame Considering Green Building and Energy Efficient Technique using Analysis Tool ETABS

Authors

  • Ranjeet Singh Department of Civil Engineering, S.V.N. University, Sagar, Bhopal, Madhya Pradesh, India Author
  • P.C. Diwan Department of Civil Engineering, S.V.N. University, Sagar, Bhopal, Madhya Pradesh, India Author

Keywords:

ETABS, Structural Analysis, Energy Efficiency, Low Carbon, Building, Environment

Abstract

Minimizing energy consumption in buildings has become an important goal in architecture and urban planning in recent years. Guidelines were developed for each climatic zone aiming at increasing solar exposure for buildings in cold climates and at reducing solar exposure for buildings in hot climates. This approach usually plans for the season with the harshest weather; often forgetting that temperatures in cities at latitude 25° can drop below thermal comfort limits in winter and that temperatures in cities at latitude 48° often rise above thermal comfort limits in summer. This paper argues that a holistic approach to energy efficient building forms is needed. It demonstrates a generic energy efficient building form derived by glass walls at exterior and composite wall at the interior. 
In this study material replacements were scheduled such as low carbon footprint material replacing a certain percentage of cement in concrete for R.C.C. members.  In this research work for modelling and dynamic analysis ETABS tool is considered.
              

Downloads

Download data is not yet available.

References

IRC 6, Standard specification and code of practice for road bridges section II Loads and stresses, The Indian Road Congress, (1996).

IRC:5,“Standard Specifications and Code of Practice for Road Bridges”, Section I,(1998).

IRC:21, “Standard Specifications and Code ofPractice for Road Bridges”, Section III,(2000).

Kim K., Yoo C. H, Design Loading For Deeply Buried Box Culverts, IR-02-03, Highway Research Center, Auburn University,Alabama (2002).

B.N.Sinha and R. P.sharma, Analysis of Box culvert by Stiffness Method, journal of Indian Road Congress, Paper No. 555, PP. 189-219, (2009).

Kalyanshetti M.G and Malkhare S.V, Analysis of box culvert by considering soil structure interaction, Paripex- Indian journal of research, Vol. 1, Issue 4, PP.71-74, (2012).

Chen S. S, Harik I. E, Dynamic Effect of a Moving Truck on a Culvert, (2012), JournalOf Bridge Engineering, Vol. 17, 02, p 123-129.

Kattimani K. S, Shreedhar R, Parametric Studies Of Box Culvert, (2013), International Journal of Research in Engineering andScience, Vol. 1, 01, p. 58-65.

Downloads

Published

15-06-2019

Issue

Section

Research Articles

How to Cite

Singh, R., & Diwan, P. (2019). Analysis of a 3-Dimensional Building Frame Considering Green Building and Energy Efficient Technique using Analysis Tool ETABS . International Journal of Scientific Research in Civil Engineering, 3(3), 32-37. https://ijsrce.com/index.php/home/article/view/IJSRCE19336

Similar Articles

1-10 of 407

You may also start an advanced similarity search for this article.