Health Monitoring of an Existing RC Structure Considering Seismic Analysis Using Analysis Tools Staad
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Time History, Staad.pro, Non Destructive Test, Rebound Hammer, Existing Structure, Retrofitting, AnalysisAbstract
Seismic retrofitting is mainly done to meet the seismic safety requirements. The planning of alterations to existing buildings differs from new planning through an important condition; the existing construction must be taken as the basis of all planning and building actions. India is one of the most earthquake prone countries in the world and has experienced several major or moderate earthquakes during the last 15 years. About 50-60 % of the total area of the country is vulnerable to seismic activity of varying intensities. Many existing buildings do not meet the seismic strength requirement. In this study we are performing health monitoring on existing old structure G+2, using rebound hammer to evaluate its present strength and analyze the structure using analysis tool staad.pro. In this study we are performing time history analysis (el-centrino) with retrofitting over weak members.
Downloads
References
Agarwal A. (2012): Seismic Evaluation of Institute Building, Bachelor of Technology Thesis, National Institute of Technology Rourkela.
Agarwal P., Shrikhande M. (2004): Earthquake Resistant Design of Structures, PHI Publication.
Bodige N., Ramancharla P. K. (2012): Pushover Analysis of RC Bare Frame: Performance Comparison between Ductile and Non-ductile Detailing, Report No: IIIT/TR/2012/-1, Urban Safety of Mega Cities in Asia (USMCA)
Faella C., Martinelli E., Nigro E. (2002): Steel and concrete composite beams with flexible shear connection: “exact” analytical expression of the stiffness matrix and applications, Computers & Structures - COMPUT STRUCT, vol. 80, no. 11, pp. 1001- 1009, 2002
Fardis M. N. (2009): Seismic Design, Assessment and Retrofitting of Concrete Buildings, Springer Publication.
Griffith M. C., Pinto A. V. (2000):“Seismic Retrofit of RC Buildings - A Review and Case Study”, University of Adelaide, Adelaide, Australia and European Commission, Joint Research Centre, Ispra Italy.
Goel R. K. (2008): Evaluation of Current Nonlinear Static Procedures for Reinforced Concrete Buildings, The 14th World Conference on Earthquake Engineering October 12- 17, 2008, Beijing, China.
Kadid A., Boumrkik A. (2008): Pushover Analysis of Reinforced Concrete Frame Structures, Asian Journal of Civil Engineering (Building and Housing) Vol. 9, No. 1 (2008) Pages 75-83
Krawinkler H., Seneviratna G.D.P.K. (1998): Pros and Cons of a Pushover Analysis of Seismic Performance Evaluation, Engineering Structures, Vol.20, 452-464.
Lawson R.S., Reinhorn A.M., Lobo R.F. (1994): Nonlinear Static Pushover Analysis - Why, When and How? Proceedings of the 5th US National Conference on Earthquake Engineering, Chicago, Vol. 1, 283-292.
Monavari B., Massumi A., Kazem, A (2012): Estimation of Displacement Demand in RC Frames and Comparing with Target Displacement Provided by FEMA-356, 15th World Conference on Earthquake Engineering, 24th to 28th September, 2012, Lisbon, Portugal.
Mouzzoun M., Moustachi O., Taleb A. (2013): Seismic Damage Prediction of Reinforced Concrete Buildings Using Pushover Analysis, International Journal of Computational Engineering Research (ijceronline.com) Vol. 3 Issue. 1, January 2013.
Mouzzoun M., Moustachi O., Taleb A., Jalal S. (2013): Seismic performance assessment of reinforced concrete buildings using pushover analysis, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE); ISSN: 2278-1684 Volume 5, Issue 1 (Jan. - Feb. 2013), PP 44-49.
Mwafy A. M., Elnashai A. S. (2001): Static Pushover versus Dynamic Analysis of RC Buildings, Engineering Structures, Vol. 23, 407-424.
Otani S. (2000): Seismic Vulnerability Assessment of Reinforced Concrete Buildings, Faculty of Engineering, University of Tokyo, Series B, Vol., XLVII, October 2000, pp. 5 - 28.
Pillai S. U., Menon D. (2009): Reinforced Concrete Design, TMH Publication.
Poluraju P., Nageswara Rao P. V. S. (2011): Pushover analysis of reinforced concrete frame structure using SAP 2000, International Journal of Earth Sciences and Engineering, ISSN 0974-5904, Volume 04, No 06 SPL, pp. 684-690.
Rai, Durgesh C. (2005): “Seismic Evaluation and Strengthening of Existing Buildings” IIT Kanpur and Gujarat State Disaster Mitigation Authority.
Amlan K. Sengupta, ChemuruSrinivasulu Reddy, Badari Narayanan V T and Asokan A, (2004)?seismic analysis and retrofit of existing multistoried buildings in India – an overview with a case?
S. Anbarasu, K.Tamilvanan, “Seismic Retrofitting of Reinforced Concrete Frame Building with Soft Storey”, International Journal of Innovative Research in Science, Engineering and Technology, vol. 5, issue 3, March 2016.
Kritika Gupta, Abhishek Kumar, MohdAfaque khan, “Review paper on seismic retrofitting of structures” Volume:04/April-2017.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
