Structural Modification For High Rise Building For Energy Efficiency : A Review
Keywords:
Structural Analysis, Analysis Tool, Review, Tall Structures, Forces, DisplacementAbstract
Energy conservation in the built environment has become one of the most important topics on both political and scientific agendas. The rising global population, decreasing fossil-based energy resources, rising emissions of harmful gases have emerged as the main motivators for energy efficiency in buildings. In addition, cost efficiency, safety and the need to reduce carbon emissions are fundamental reasons for energy conservation. In the last century, the incredible increase in the amount of energy usage and the increasing dependence on energy resources have forced human beings to consume energy in the most efficient way in every area. The world is dominated by buildings with about 40% energy consumption. For this reason, the construction sector is affected by global energy issues, and the traces of these effects are manifested in the design, construction and usage processes of the buildings. In this context, energy efficient design systems related to the production of the buildings that draw so much of the world's energy consumption have been put forward. This Study scrutinizes approaches to energy efficiency in the buildings of the last century. In this paper we are presenting literature survey related to past researches related to designing and analysis of green buildings.
Downloads
References
M. Venkataraj and Helen santhi, “seismic performance of flyashed concrete building with flyash brick and burnt clay brick masonry infill”, International Journal of Advances in Mechanical and Civil Engineering, ISSN: 2394-2827, Volume-2, Issue-1, Feb.-2015, pp 29-33.
Chandra Shekhar Singh, “Green Construction: Analysis on Green and Sustainable Building Techniques”, Civil engineering research journal, ISSN 2575:8950, Vol.4 Issue 3, 2018, pp. 1-8.
R. Dwiwedi and A.K. Jain, “The Evaluation of Building Materials in Terms of Energy Efficiency”, Periodica Polytechnica Civil Engineering, ISSN 54, Vol. 59, 2014, pp. 45-58.
José Sanches. “Analysis and Design of Structural Glass Systems”, Instituto Superior Técnico, Technical University of Lisbon, ISSN 2543, 2013, pp 01-11.
Pacheco Qian and Seong W. Lee, “The Design and Analysis of Energy Efficient Building
Envelopes for the Commercial Buildings by Mixedlevel Factorial Design and Statistical Methods”, Research Gate, 2012, pp. 23-32.
Khudhair, A. M. and Farid, M. M., 2004. A review on energy conservation in building applications with thermal storage by latent heat using phase change materials, Energy Conversion and Management, vol.45, no. 2, 263-275.
Seomus Tavares and George martins “Melting and solidification in multi-dimensional geometry and presence of more than one interface”, Energy Conversion and Management, vol.39, no. 8, 2007, pp.809-818.
Crawley, D.B.; Hand, J.; Kummert, M.; Griffith, B.T. Contrasting the capabilities of building energy performance simulation programs. Build. Environ. 2008, Vol, 43,pp. 661–673.
Kuznik, F.; Danny, D.; Johannes, K.; Roux, J.-J. A review on phase change materials integrated in building walls. Renew. Sustain. Energy Rev. 2010, 15, 379–391.
Rosa M., and Wheatley Christensen, “Building simulation as an assisting tool in designing
an energy efficient building: A case study. In Proceedings of the Integrated Environment Solutions limited, Eleventh International IBPSA Conference, Glasgow, Scotland,July 2011, pp 27-30.
Maile, T.; Frauke r, M.; Bazjanac, V. Building Energy Performance Simulation Tools—A Life-Cycle and Interoperable Perspective; CIFE Working Paper #WP107; Stanford University: Stanford, CA, USA, 2011.
Hyunjoo Kim, Zhang, G.; Zhou, J.; Xu, F. The Influence of Wall’s Insulation Thickness to Building Energy Consumption. In Proceedings of the International Conference on Mechanic Automation and Control Engineering (MACE), Wuhan, China, 26–28 June 2011; pp. 4241–4244
Parisio, D. Varagnolo, D. Risberg, G. Pattarello, M. Molinari, and K. H. Johansson, “Randomized Model Predictive Control for HVAC Systems,” in Proceedings of the 5th ACM Workshop on Embedded Systems For Energy-Efficient Buildings, 2012.
Kaushik and Basha, “Underfloor heating with latent heat storage” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol.2015, no. 5, 601-609.
Khajeh mohammad, M., Mortazavi, S.M., Mallekpour, S. and Bidoki, S.M. ‘‘The effect of nano- and micro-TiO2 particles on reflective behavior of printed cotton/nylon in Vis/NIR regions’’, Color Res. Appl.,2015. pp. 1–7.
Mehrotra, Naji Givi , Suraya Abdul Rashid, “High-Performance, High-Volume Fly Ash Concrete For sustainable Development”, International Workshop On Sustainable Development And Concrete Technology, May 2017, Beijing, China.
Saha and Sarker, HighPerformance, High-Volume Fly Ash Concrete. Supplementary Cementing Materials for Sustainable Development, Inc., Ottawa, Canada, 2017, pp. 101-112.
Klarin Gao Yingli, The effect of fly ash on the fluidity of cement paste, mortar, and concrete, International Workshop On Sustainable Development And Concrete Technology, May 2018, pp. 23-34.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
