A Review on Strength Characteristics of Concrete Using Fly Ash and Steel Fiber under Alkaline Attack
DOI:
https://doi.org/10.32628/IJSRCE25947Keywords:
Industrial Waste, Concrete Strength, Durability, Fiber Reinforced Concrete, Pozzolanic Materials, Mechanical PropertiesAbstract
This review paper investigates the experimental enhancement of concrete strength through the incorporation of industrial waste materials—specifically fly ash and steel fibers—under alkaline environmental exposure. Fly ash, a byproduct of thermal power plants, is utilized as a partial cement replacement to improve workability, durability, and environmental sustainability, while steel fibers enhance tensile strength and crack resistance. The review consolidates findings from various studies on the mechanical performance, durability characteristics, and microstructural changes of such concrete composites. Emphasis is placed on the influence of alkaline conditions, which simulate aggressive environments such as marine or industrial settings. Results indicate that optimal blending of fly ash and steel fibers can significantly improve concrete performance while reducing its environmental footprint. This review aims to support sustainable construction practices by promoting the reuse of industrial waste in high-performance concrete applications.
Downloads
References
Arel, Hasan Şahan. 2011. "Effects of Fly Ash Fineness on the Mechanical Properties of Concrete." Construction and Building Materials 25(2): 933–938.
Banthia, N., and R. Gupta. 2004. “Influence of Polypropylene Fiber Geometry on Plastic Shrinkage Cracking in Concrete.” Cement and Concrete Research 34(9): 1571–1577. https://doi.org/10.1016/j.cemconres.2004.01.025. DOI: https://doi.org/10.1016/j.cemconres.2004.01.025
Christy, D.V. 2009. “Effect of Class–F Fly Ash as Partial Replacement with Cement and Fine Aggregate in Mortar.” International Journal of Civil and Structural Engineering.
Chindaprasirt, P., S. Homwuttiwong, and C. Jaturapitakkul. 2005. “Strength and Water Permeability of Concrete Containing Palm Oil Fuel Ash and Fly Ash.” In Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10).
Gadget, M.A. 2013. “Mix Design of Fiber Reinforced Concrete Using Fly Ash and Steel Fibers.” Journal of Engineering Science and Technology.
Islam, A. 2021. “Comparative Study on the Effect of Natural, Synthetic and Steel Fibers in Concrete.” Journal of Civil Engineering Research and Practice. DOI: https://doi.org/10.32732/jcec.2021.10.4.216
Johnston, C. D. 2001. “Fiber-Reinforced Cements and Concretes.” In Advances in Concrete Technology. Gordon and Breach Science Publishers.
Khadake, R.D. 2012. “Steel Fiber Reinforced Concrete with Fly Ash.” International Journal of Scientific & Engineering Research.
Khadake, R.D. 2013. “Experimental Study on Steel Fiber Reinforced Concrete with Fly Ash for M35 Grade.” International Journal of Emerging Technology and Advanced Engineering.
Kumar, A. 2020. “Strength and Durability Properties of Fiber Reinforced Concrete.” International Journal of Civil Engineering.
Mathapati, S.P. 2018. “Strength Aspects of Fly Ash Aggregates Concrete.” International Research Journal of Engineering and Technology.
Mehta, P.K. 2010. “High-Performance, High-Volume Fly Ash Concrete for Sustainable Development.” ACI Journal.
Mehta, P. K. 2004. “High-Performance, High-Volume Fly Ash Concrete for Sustainable Development.” In Proceedings of the International Workshop on Sustainable Development and Concrete Technology, 3–14.
Mindess, S., J. F. Young, and D. Darwin. 2003. Concrete. 2nd ed. Upper Saddle River, NJ: Prentice Hall.
Muthupriya, P. 2014. “Effect of GGBFS and Fly Ash in Self Compacting Concrete.” Journal of Civil Engineering Research.
Naaman, A. E., and H. Najm. 1991. “Toughness of High Performance Fiber Reinforced Cement Composites.” Cement and Concrete Composites 13(2): 151–162. https://doi.org/10.1016/0958-9465(91)90002-U. DOI: https://doi.org/10.1016/0958-9465(91)90011-6
Neville, A. M. 1995. Properties of Concrete. 4th ed. London: Longman.
Papadakis, V. G., C. G. Vayenas, and M. N. Fardis. 1991. “Fundamental Modeling and Experimental Investigation of Concrete Carbonation.” ACI Materials Journal 88(4): 363–373. DOI: https://doi.org/10.14359/1863
Patil, R.T. 2015. “Effect of Different Fibers on Concrete Strength.” International Journal of Civil and Structural Engineering.
Reza, F. 2005. “The Effect of Fly-Ash on Permeability and Chemical Durability of Concrete Used in Corrosive Environment.” Construction and Building Materials.
Scrivener, K. L., V. M. John, and E. M. Gartner. 2018. “Eco-efficient Cements: Potential Economically Viable Solutions for a Low-CO₂, Cement-Based Materials Industry.” Cement and Concrete Research 114: 2–26. https://doi.org/10.1016/j.cemconres.2018.03.015. DOI: https://doi.org/10.1016/j.cemconres.2018.03.015
Shende, A.M. 2012. “Experimental Study on Steel Fiber Reinforced Concrete for M-40 Grade.” International Journal of Engineering and Innovative Technology.
Tiwari, P.K. 2016. “Comparison of Steel and Polymeric Fiber Reinforced Concrete.” Journal of Building Materials.
Verma, Y. 2012. “Effect of Fly Ash on the Strength of Concrete.” Indian Concrete Journal.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
