A Review Paper on Influence of Process Parameters in a Cold Chamber under High Pressure Die Casting
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Die castings, Aluminium alloy, Process parameters, Cast product, Product qualityAbstract
Die castings are among the most frequently produced mass-market goods in the metal working sector for complicated forms and Aluminium alloy that is lightweight. The needs of getting the light weight components with the same or improved mechanical, metallurgical properties, the industry is switching on these types of alloys. The present study is aimed at investigating the impact of various process parameters of cold chamber high pressure die casting machine on the cast product. Moreover the process parameters are further optimized with the aim to get optimum product quality.
Downloads
References
Guang Wei Liu, Yosry Sadeik Morsi, Brian Robert Clayton, (2000),"Characterisation of the spray cooling heat transfer involved in a high pressure die casting process ", Int. J. Therm. Sci., Vol. 39, pp 582-591.
C. Mitterer a, F. Holler, F. U stel , D. Heim (2000)," Application of hard coatings in aluminium die casting — soldering, erosion and thermal fatigue behaviour", Surface and Coatings Technology, Vol. 125, pp 233-239
B.L. Mordike, T. Ebert (2001),"Magnesium Properties — applications — potential", Materials Science and Engineering A302, pp 37-45.
S. Gulizia, M.Z. Jahedia, E.D. Doyle (2001)," Performance evaluation of PVD coatings for high pressure die casting", Surface and Coatings Technology, Vol. 140, pp 200-205.
Xiong Shoumei, F. Lau, W.B. Lee (2002)," An efficient thermal analysis system for the die-casting process", Journal of Materials Processing Technology, Vol. 128, pp 19-24.
Z.W. Chen (2003), "Skin solidification during high pressure die casting of Al /11Si /2Cu / 1Fe alloy", Materials Science and Engineering A348, pp 145-153.
. L. Álvarez, C.J. Luis, I. Puertas (2004)," Analysis of the influence of chemical composition on the mechanical and metallurgical properties of engine cylinder blocks in grey cast iron", Journal of Materials Processing Technology 153–154, pp 1039- 1044.
Koichi Ishikawa, Hiroyuki Watanabe, Toshiji Mukai (2005)," High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures" Materials Letters, Vol 59, pp 1511-1515.
Matthew S. Dargusch, G. Dour, N. Schauer, C.M. Dinnis, G. Savage (2006)," The influence of pressure during solidification of high pressure die cast aluminium telecommunications components", Journal of Materials Processing Technology, Vol. 180, pp 37-43.
Adrian S. Sabau, Zhuoxi Wu (2007)," Evaluation of a heat flux sensor for spray cooling for the die casting processes" Journal of Materials Processing Technology ,Vol. 182, pp 312-318.
Zhi-Peng Guo, Xiong Shou-mei, Liu Bai-cheng, Mei Li, John Allison (2008)," Determination of the heat transfer coefficient at metal–die interface of high pressure die casting process of AM50 alloy", International Journal of Heat and Mass Transfer, Vol. 51(25–26), pp. 6032–6038.
Faruk Mert, Carsten Blawert, Karl Ulrich Kainer, Norbert Hort (2012),"Influence of cerium additions on the corrosion behaviour of high pressure die cast AM50 alloy", Corrosion Science, Vol. 65, pp 145-151.
Peng Zhang, Zhenming Li, Baoliang Liu, Wenjiang Ding, Liming Peng (2016) ,"Improved tensile properties of a new aluminum alloy for high pressure die casting", Materials Science & Engineering A 651 , pp 376-390.
A.S. Sabau, S. Vishwanathan (2018), "Micro porosity prediction in aluminium alloy castings", Metall. Mater. Trans. 33B, 243.
O. Pracha, O. Trudonoshynb, P. Randelzhoferb, С. Körnerb, K. Durst (2019)," Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys", Materials Science & Engineering A 759, pp 603-612.
Shuhui Lv, Xiaoling Lü, Fanzhi Meng, Qiang Yang, Xin Qiu, Pengfei Qin, Qian Duan, Jian Meng(2020)," Microstructures and mechanical properties in a Gdmodified high-pressure die casting Mg–4Al–3La 0.3Mn alloy", Materials Science & Engineering A 773 (2020) 138725.
Yongfa Zhang, Jiang Zheng, Yatong Xia, Haoge Shou, Wei Tan, Weijian Han,Qing Liu (2020)," Porosity quantification for ductility prediction in high pressure die casting AM60 alloy using3D X-ray tomography", Materials Science & Engineering A 772.
Sakir Yazman, Ugur Koklu, Levent Urtekin, Sezer Morkavuk, Lokman Gemi (2020), Experimental study on the effects of cold chamber die casting parameters on high-speed drilling machinability of casted AZ91 alloy, Journal of Manufacturing Processes, Vol. 57, pp.136–152.
Amol R. Jadhav, Deepak P. Hujare, Pravin P. Hujare (2020),Design and optimization of gating system, modification of cooling system position and flow simulation for cold chamber high pressure die casting machine, Materials Today: Proceedings.
B Budiarto and T D Kurniawan (2021), Effect of vacuum system on porous product defects and micro structures on the ADC-12 aluminum material with cold chamber die casting machines, IOP Conf. Series: Earth and Environmental Science 878.
Juan Martínez-Pastor, Juan José Hernández-Ortega and Rosendo Zamora (2022),A Decision Support System (DSS) for the Prediction and Selection of Optimum Operational Parameters in Pressure Die-Casting Processes, Materials, Vol. 5309.
Tingli Wang, Jian Huang, Hongyuan Fu, Ke Yu and Shan Yao (2020), Influence of Process Parameters on Filling and Feeding Capacity during High-Pressure DieCasting Process, Applied Science, Vol. 12.
Zhichao Niu , Guangyu Liu , Tian Li , Shouxun Ji (2022),Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall castings, Journal of Materials Processing Tech. 303.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
