Analysis of A High Rise Building Frame Considering Hybrid Shear Wall Under Lateral Load Using ETABS
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Hybrid Shear Wall, Response Spectrum Analysis, ShearWall, Seismic ForcesAbstract
Shear dividers are primary components that safeguard structures from parallel loads like breeze and quakes. Whenever the outside dividers of a structure are inadequately solid and firm, shear dividers are added to the inside to give more noteworthy strength and solidness. At the point when the allowable range width proportion for the floor or rooftop stomach is surpassed, these shear dividers are required. Shear dividers are flexural individuals that are usually utilized in high-and low-ascent structures to forestall all out breakdown because of seismic burdens.
Here half breed shear divider implies a blend of shear divider and X supporting This examination is engaged towards introducing the way of behaving of construction considering three unique cases to be specific, structure with X propping at corner, structure with shear divider at corner and design with crossover shear divider at corner. The construction was demonstrated and examined utilizing logical application ETABS v 2016. The boundaries of examination were Story relocation, story shear. Story float, story firmness and base shear.
Downloads
References
Saleem Malik Yarnal, Sagar S Allagi, Prashant M Topalakatti and Arif Ahmed Mulla, [Non-Linear Analysis of Asymmetric Shear Wall with Openings], International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Vol. 4 Issue 08, August-2015.
Thavera Wihardja and Iswandi Imran, [Seismic Behavior of Hybrid Coupled Wall System], Regional Conference in Civil Engineering (RCCE), The Third International Conference on Civil Engineering Research (ICCER), August 1st-2nd 2017.
Zhangfeng Zhu and Zhengxing Guo, [Experiments on Hybrid Precast Concrete Shear Walls Emulating Monolithic Construction with Different Amounts of Posttensioned Strands and Different Debond Lengths of Grouted Reinforcements], Hindawi Publishing Corporation Advances in Materials Science and Engineering Volume 2016, Article ID 6802503, 13 pages.
Sooria raj, [Feasibility Study on the Structural Behaviour of Hybrid Wood Steel Structures Using Finite Element Analysis], International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016, ISSN 2229-5518.
Abhishek Sharma & Prince Sharma, [Seismic Performance Evaluation of Hybrid Coupled Shear Walls in High Rise Buildings], International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-8 June, 2019.
Alshawabkeh Shorouq and Wu Li, [Hybrid Post-Tensioned Concrete Shear Walls Behavior Under Seismic Loads], International Journal of Scientific and Research Publications, Volume 9, Issue 5, May 2019, ISSN 2250-3153.
SATYA NARAYANA REDDY Y, V MAHESH and SENTHIL KUMAR, [COMPARATIVE STUDY ON CONVENTIONAL, SHEAR WALL AND HYBRID STRUCTURES INDIFFERENT SEISMIC ZONES], International Journal of Advances in Mechanical and Civil Engineering, ISSN: 2394-2827, Volume-6, Issue-3, May-2019.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0