Comparative Analysis of Heighted Structure Using Analysis Tools STAAD, Sap2000, ETABS Considering Lateral Loads A Review
Keywords:
SAP 2000, Staad.Pro, ETAB, Seismic Analysis, Structure Analysis, Cost AnalysisAbstract
During an earthquake, failure of structure starts at points of weakness. This weakness arises due to discontinuity in mass, stiffness and geometry of structure. The structures having this discontinuity are termed as Irregular structures. Irregular structures contribute a large portion of urban infrastructure. Vertical irregularities are one of the major reasons of failures of structures during earthquakes. For example structures with soft storey were the most notable structures which collapsed. So, the effect of vertically irregularities in the seismic performance of structures becomes really important. Height-wise changes in stiffness and mass render the dynamic characteristics of these buildings different from the regular building. IS 1893 definition of Vertically Irregular structures.
Downloads
References
Richa Agarwal and ArchnaTiwari, [Comparison of Design Result of Multi Story Structure using ETABS and STAAD PRO Software], International Journal of Engineering Science and Computing, August 2017, Volume 7 Issue No.8.
S .VijayaBhaskar Reddy and V.Madhu, [Comparative Study on Design Results of a Multi-storied Building using STAAD PRO and ETABS for Regular and Irregular Plan Configuration], International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 15 (2018) pp. 12194-12201.
Kai Hu, Yimeng Yang, Suifeng Mu, Ge Qua, [Study on High-rise Structure with Oblique Columns by ETABS, SAP2000, MIDAS/GEN and SATWE], International Conference on Advances in Computational Modeling and Simulation, Procedia Engineering 31 (2012) 474 – 480.
Mahmad saber and D. GousePeera, [COMPARISON DESIGN RESULT OF RCC BUILDING USING STAAD AND ETABS SOFTWARE], International Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN: 2349-2163, Issue 8, Volume 2 (August 2015)
Mohammad Kalim, Abdul Rehman and B S Tyagi, [Comparative Study on Analysis and Design of Regular Configuration of Building by Staad.Pro and Etabs], International Research Journal of Engineering and Technology (IRJET), Volume: 05 Issue: 03 | Mar-2018.
Lelisa Nemo Nura and Jay Prakash Pandit, [Comparative Study of Structural Software Sap2000 and Staad Pro], International Journal of Engineering Science Invention (IJESI), Volume 8 Issue 03 Series. IV || March 2019 || PP 37-43.
Sakshi A Manchalwar, Akshay S Puri and VishakhaAswale, [Comparative Study of Analysis and Design Of RC Frame], International Journal of Science, Engineering and Technology Research (IJSETR), Volume 5, Issue 4, April 2016.
P. D. Hiwase, Aditi Joshi and AakashKeshariya, [Comparison between Manual and Software Approach towards Design of Structural Elements], The International Journal of Engineering and Science (IJES), || Pages || PP 54-56 || 2018.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
