A Review on Partial Replacement of Bitumen by Waste Oil, Plastic and Tire In Flexible Pavement

Authors

  • K. Srinivasan Assistant Professor, Dept. of Civil Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India. Author
  • L. Priyadharshini UG Students, Dept. of Civil Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India. Author
  • M. Srividhya UG Students, Dept. of Civil Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India. Author
  • T. Haripiriya UG Students, Dept. of Civil Engineering, Sri Manakula Vinayagar Engineering College, Puducherry, India. Author
  • M. Yuvarani Author

DOI:

https://doi.org/10.32628/IJSRCE

Keywords:

Bitumen, Waste Oil, Waste Plastic, Waste Tire, Marshall Stability Test

Abstract

Around the world Bitumen is defined as a sticky, highly viscous liquid or semi-solid that can be found in some natural deposits or obtained as a by-product of fractional distillation of crude petroleum. It is a key challenge in the highway industry to scale back the dependence on fossil fuels. So, the current challenge for the road industry is to use renewable materials that are bio-materials not subjected to depletion in partial replacement of bitumen, thus making the sector less dependent on petroleum-based products. Waste oil that is disposed of on land or sea without pre-treatment has a negative impact on the environment. Plastic waste refers to the significant amount of plastic that isn’t recycled and ends up in landfills or, in the developing world, is thrown into uncontrolled dump sites. Most tires, especially those fitted to motor vehicles, are manufactured from synthetic rubber. At the same time, the continuous increase in the number of vehicles indicates the need for roads with better quality and engineering design. To reduce the use of non-renewable materials, waste oil, waste plastic and used tyres can be used in their correct ratios to produce partially modified bitumen.              

Downloads

Download data is not yet available.

References

Ana Jiménez del Barco Carrión, Ayad Subhy, Maria Angeles Izquierdo Rodriguez, Davide Lo Presti (2020) Optimisation of liquid rubber modified bitumen for road pavements and roofing applications, Construction and Building Materials, Vol.249,pp. 118630.

Anwar Hazoor Ansari, Fauzan Mohd Jakarni, Ratnasamy Muniandy, Salihudin Hassim, Zafreen Elahi (2021) Natural rubber as a renewable and sustainable bio-modifier for pavement application: A review, Journal of Cleaner Production, Vol.289, pp. 125727.

Arjita Biswasa, Amit Goela, Sandeep Potnisb (2020) Performance comparison of waste plastic modified

Downloads

Published

15-04-2022

Issue

Section

Research Articles

How to Cite

K. Srinivasan, L. Priyadharshini, M. Srividhya, T. Haripiriya, & M. Yuvarani. (2022). A Review on Partial Replacement of Bitumen by Waste Oil, Plastic and Tire In Flexible Pavement . International Journal of Scientific Research in Civil Engineering, 6(2), 214-222. https://doi.org/10.32628/IJSRCE

Similar Articles

1-10 of 146

You may also start an advanced similarity search for this article.