Seismic Analysis of a Structural Frame Considering Joint Analysis of Beam – Column with Conventional and Pre –Tensioning Slab Using Analysis Tool STAAD.PRO

Authors

  • Rahul Singh Parihar Department of Civil Engineering, Sagar Institute of Research and Technology - Excellence, Bhopal, Madhya Pradesh, India Author
  • Mayank Gupta Department of Civil Engineering, Sagar Institute of Research and Technology - Excellence, Bhopal, Madhya Pradesh, India Author

DOI:

https://doi.org/10.32628/IJSRCE

Keywords:

Staad.Pro, Seismic Analysis, P-Delta, Joints, Deflection

Abstract

The behavior of reinforced concrete moment resisting frame structures in recent earthquakes all over the world has highlighted the consequences of poor performance of beam column joints. Large amount of research carried out to understand the complex mechanisms and safe behavior of beam column joints has gone into code recommendations. This Study presents critical review of recommendations of well established codes regarding design and detailing aspects of beam column joints considering rigid diaphragm. In this study conventional slab and Pre-tensioning slab is considered and effect on beam column joint is studied using Staad software considering lateral force (P-delta) and Non-linear analysis. The main motive of our study is to determine the non linear analysis and its effect on joints of a G+8 High rise multistory building 3dimensional frame considering P-delta analysis using Staad.              

Downloads

Download data is not yet available.

References

Ankit Purohit and Lovish Pamecha, [Seismic Analysis of G+12 Multistory Building Varying Zone and Soil Type], SSRG International Journal of Civil Engineering ( SSRG – IJCE ) – Volume 4 Issue 6 – June 2017.

Arvindreddy and R.J.Fernandes, [Seismic analysis of RC regular and irregular frame structures], International Research Journal of Engineering and Technology (IRJET), Volume: 02 Issue: 05 | Aug-2015.

Boskey Bahoria, R. S. Deotale and Dr D K Parbat, [Comparative Design of RCC & Posttensioned flat slabs], INTERNATIONAL CONFERENCE ON CURRENT TRENDS IN TECHNOLOGY, „NUiCONE – 2010?.

Boskey Vishal Bahoria and Dhananjay K. Parbat, [Analysis and Design of RCC and Post-tensioned Flat Slabs Considering Seismic Effect], IACSIT International Journal of Engineering and Technology, Vol. 5, No. 1, February 2013.

Jnanesh Reddy R K and Pradeep A R, [Comparative Study of Post Tensioned and RCC Flat Slab in Multi-Storey Commercial Building], International Research Journal of Engineering and Technology (IRJET), Volume: 04 Issue: 06 | June -2017.

Rajat Srivastava and Sitesh Kumar Singh, [Seismic Analysis and Design of G+9 RCC Residential Building in STAAD.PRO for Zone II Region], International Journal of Innovative Research in Science, Engineering and Technology, Vol. 7, Issue 5, May 2018.

Vishal Gupta, Rohit Sahu and Dr. Pankaj Singh, [Comparative Analysis of Conventional Slab, Flat Slab and Post-Tensioning Slab], International Journal for Scientific Research & Development| Vol. 6, Issue 03, 2018.

Vishal D. Dhore and Dr. S.H.Mahure, [COMPARATIVE STUDY OF RCC AND PRESTRESSED CONCRETE ONE WAY CONTINUOUS SLAB FOR VARIOUS SPANS], INTERNATIONAL JOURNAL FOR ENGINEERING APPLICATIONS AND TECHNOLOGY, Issue 9 vol 3 ISSN: 2321-8134, 2019.

Akanshu SHARMA, R. ELIGEHAUSEN and J. HOFMANN, [INFLUENCE OF JOINT MODELING ON SEISMIC EVALUATION OF NON-SEISMICALLY DESIGNED RC FRAME STRUCTURES], Second European Conference of Earthquake Engineering and Seismology, Istanbul Aug. 25-29, 2014.

Downloads

Published

16-01-2021

Issue

Section

Research Articles

How to Cite

Parihar, R. S., & Gupta, M. (2021). Seismic Analysis of a Structural Frame Considering Joint Analysis of Beam – Column with Conventional and Pre –Tensioning Slab Using Analysis Tool STAAD.PRO . International Journal of Scientific Research in Civil Engineering, 5(1), 23-32. https://doi.org/10.32628/IJSRCE

Similar Articles

1-10 of 260

You may also start an advanced similarity search for this article.