Analysis of a Cable Stayed Suspension Hybrid Bridge Considering Vehicular Loading Using CSI Bridge
DOI:
https://doi.org/10.32628/IJSRCEKeywords:
Cable Stayed Bridge, Suspension Bridge, Cable Stayed Suspension Hybrid Bridge, Pylon, Seismic Analysis, CSi BridgeAbstract
A suspension bridge is a type of bridge where the deck is held aloft by suspension cables that are positioned beneath vertical suspenders. The main structural elements of a suspension bridge system are stiffening girders/trusses, main suspension cables, main towers, and cable anchorages at each end of the bridge. Vertical suspenders support the weight of the deck and the traffic load, while the main cables are suspended between towers and eventually connect to the anchorage or the bridge itself. The cable erection method is used to construct the superstructures of suspension bridges, just like other cable-supported bridges, without the need for false work. As in this instance, the main goal of the research is to compare the behavior of three different cases a cable stayed bridge, a suspension bridge, and a cable stayed suspension hybrid bridge under comparable loading scenarios. Using the analytical application CSI bridge, the three cases are modeled and analyzed while taking seismic and vehicular loading into account.
Downloads
References
Vivek Soni, Rahul Satbhaiya, [Analysis of a Cable-Stayed Suspension Hybrid Bridge Considering Vehicular Loading using CSI Bridge], International Journal of Scientific Research in Civil Engineering, Volume 7, Issue 2, 2023
Jyotiprakash Sahu, Radeep Ku. Nirmal, Okesh Singh, [Analysis of Suspension Bridge with different Types of Anchoring Considering Vehicular Loading using SAP2000 : A Review], International Journal of Scientific Research in Civil Engineering, Volume 6, Issue 5, 2022
Mr. Neel Shah, Prashant Kanzariya, Dr. Bimal Shah, [PARAMETRIC STUDY OF CABLE STAYED BRIDGE USING DIFFERENT PYLON CONFIGUARTION], International Journal of Engineering Applied Sciences and Technology, Vol. 5, Issue 10, 2021
Bilcilintan Patel , Amit Baghel , Nikhil Kumar Asst. Prof. Pankaj Kumar Sing, [A STUDY ON VIBRATION CONTROLLER AND SEISMIC RESISTANT CABLE STAYED BRIDGE WITH MODEL], international journal of advance research in science and engineering, vol: 6, issue: 4, 2017
Farhan Farid Reshi, Priyanka Singh, Shivangi, Ravinder Kumar Tomar , S K Singh, [Analysis and Design of Cable Stayed and Suspension Bridge Subjected to Wind Loading], IOP Publishing, 2021
J H Gabra, A. K. Desai, [Influence of Pylon’s Geometry on response of Cable Stayed Suspension Hybrid Bridge (CSSHB)], International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-3, September 2019
Sreerag S Kallingal, and Priyanka Singh, [Dynamic analysis of cable stayed bridge with various patterns of pylon], EDP Science, 2021
Zhijin Shen, Jianhong Jia, Nan Jiang , Bin Zhu and Wenchang Sun, [Field-Scale Experiment on Deformation Characteristics and Bearing Capacity of Tunnel-Type Anchorage of Suspension Bridge], MDPI, 2022
Shubham Garg , Vinod Kumar Modi, [DESIGN AND ANALYSIS OF CABLE STAYED BRIDGE CONSIDERATION WITH SEISMIC AND WIND LOAD BY CHANGING THE CABLE POSITION], International Advanced Research Journal in Science, Engineering and Technology Vol. 8, Issue 11, November 2021
Abhishek Pandey, Nitesh Kushwaha, [A Review On Seismic Analysis And Design Of Cable Stayed Bridge With Different Cable Arrangements], international Journal of Science, Engineering and Technology, 2020
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
