Retrofitting of an Existing Structure Using NDT Test and Analysis Tool STAAD.Pro
Keywords:
Discharge, Staad.pro, Retrofitting, N.D.T., Culvert, I.R.C. loading, Cost AnalysisAbstract
The main issue with road transportation is usually making sure there is an adequate cross drainage system in place to allow water to flow from the upstream to the downstream crossing road section. We will examine an existing R.C.C. culvert in this study, whose strength is low as a result of age and other factors like increased loading, discharge rate, etc. In this study, the N.D.T. test (rebound hammer) is used to determine the structure's current strength. Then, using the staad.pro analysis tool, we determine the best way to strengthen the structure by retrofitting it using its existing strength and measure the variation in strength after retrofitting. Here, I compare the strength of the original and the retrofitted structures and use S.O.R. CPWD 2017 rates to support the necessary cost for strengthening the structure.
Downloads
References
Ankit Prakash, Hitesh Kodwani, [A CASE STUDY ON RETROFITTING OF AN OLD STRUCTURE USING NDT AND ANALYSIS TOOL], International Research Journal of Modernization in Engineering Technology and Science, Volume:05, Issue:10, October-2023
Sourabh Sahu, Ravindra Kumar Raj, [Health Monitoring of An Existing RC Structure Considering Seismic Analysis Using Analysis Tools Staad], International Journal of Scientific Research in Civil Engineering, Volume 5, Issue 5, ISSN : 2456-6667, 2021
A A Raut, P D Pachpor and D P Mase, [Structural health assessment of reinforced concrete structure], International Conference on Advances in Civil Engineering (ICACE 2021)
Mohammad Zuhair, Swati Nibhorkar, [Systematic Evaluation and Assessment of Existing Building for Storey Extension: A Case Study], Mathematical Statistician and Engineering Applications, Vol. 71 No. 4 (2022)
Girma Zewdie Tsige, Adil Zekaria, [Seismic Performance of Reinforced Concrete Buildings with Masonry Infill], American Journal of Civil Engineering, 2018
Amol Patil, Dhiraj Dheshmukh, Vishwajeet Dubule, Somesh Patil, [TO STUDY OF EFFICIENT ECCENTRIC BRACING SYSTEM IN TALL STEEL BUILDINGS], international journal of advance research in science and engineering vol: 7, issue: 03, 2018
Mehrzad Mohabbi Yadollahi, Ahmet Benli, Sadık Varolgunes, [Masonry Infill Walls Effect in Short Column Formation in Rc Buildings: A Case Study], KSU. Journal of Engineering Sciences, 2016
Bharat Patel, Rohan Mali, Prataprao Jadhav, G. Mohan Ganesh, [SEISMIC BEHAVIOR OF DIFFERENT BRACING SYSTEMS IN HIGH RISE RCC BUILDINGS], International Journal of Civil Engineering and Technology (IJCIET) Volume 8, Issue 3, March 2017
Gomasa Rames, [Design and Analysis of Residential Building using STAAD-Pro], INDIAN JOURNAL OF ENGINEERING, 2021
D.R. Deshmukh, A.K. Yadav, S. N Supekar, A. B. Thakur , H. P Sonawane, I. M. Jain, [Analysis and Design of G+19 Storied Building Using Staad-Pro], Int. Journal of Engineering Research and Application ISSN : 2248-9622, Vol. 6, Issue 7, ( Part -1) July 2016
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
https://creativecommons.org/licenses/by/4.0
