Analysis of a High-Rise Building Frame Considering Lateral Load Using Analysis Tools

Authors(2) :-Shubham Parashar, Hariram Sahu

Buildings must be able to safely withstand any significant ground motions that could happen during construction or regular operation in order to be considered earthquake resistant. The impacts that ground motions have on structural reactions, however, are special. The time-history analysis is the analytical method that is most accurate for structures that are subjected to severe ground vibrations. For this analysis, a stepwise solution is used to integrate the pushover analysis of a multi-degree-of-freedom system, or MDOF, in the time domain in order to depict the real reaction of a structure. Although it can be applied to all practical uses, this method takes time. The pushover analysis was developed because it was necessary to develop quicker techniques that would nevertheless provide a trustworthy structural assessment or design of structures subjected to seismic loading. The foundation of pushover analysis is the presumption that during a seismic event, structures vibrate primarily in the first mode or in the lower modes. As a result, the multi-degree-of-freedom system is reduced to a single-degree-of-freedom system that has attributes that are predicted by the nonlinear static analysis of the multi-degree-of-freedom system, or SDOF system. The ESDOF system is then subjected to a response spectrum analysis with constant-ductility spectra, or damped spectra, or a nonlinear time history analysis. Through modal connections, the seismic demands for the MDOF system are converted from the ESDOF system's computed seismic demands. To illustrate the overall effects of the RCC frame building, a model was made. In seismic zone II, four G+11 concrete planar frames with four bays in each of the X and Y directions were built in accordance with Indian codes. Each frame is subjected to five unique loading situations. Pushover analysis is used to evaluate the different frames after they have been created with varied elevational irregularities but the same loading conditions. The outcomes of each frame are compared. The outcome consists of a pushover curve between base shear and displacement as well as capacity spectrum, which are performed and evaluated for each frame. This study used STAAD.Pro v8i to analyse the non-linear response of RCC frames under stress with the aim of determining the relative weights of various parameters in the non-linear analysis of RCC frames in seismic zone II, taking into account comparisons of the case with bare frame and infill wall.

Authors and Affiliations

Shubham Parashar
P. G. Scholar, Department of Civil Engineer, Infinity Management and Engineering College, Madhya Pradesh, India
Hariram Sahu
Assistant Professor, Department of Civil Engineer, Infinity Management and Engineering College, Madhya Pradesh, India

RCC Frame, Irregular Building, FEMA Hinge, Capacity Spectrum, Pushover Analysis, Seismic Reaction

  1. Pushparaj J. Dhawale and G. N. Narule, [Analysis of P-Delta Effect on High Rise Buildings], International Journal of Engineering Research and General Science Volume 4, Issue 4, July-August, 2016 ISSN 2091-2730. 
  2. PhaniKumar.V, M.Deepthi, Saikiran K and R.B.N. Santhosh, [Behavior of P-Delta Effect in High- Rise Buildings With and Without Shear Wall], International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878 (Online), Volume-8 Issue-2, July 2019.
  3. Drisya S Kumar and Margaret Abraham, [Analysis of High Rise Building for P-Delta Effect using ETABS], International Journal of Applied Engineering Research ISSN 0973-4562 Volume 14, Number 12, 2019 (Special Issue).
  4. Dharanedharan K S and Sivakumar C G, [Significance Of P-Delta Effects In High Rise RC Structure In Various Seismic Zones], International Journal of Aquatic Science ISSN: 2008-8019 Vol 12, Issue 02, 2021.
  5. T. Nagarjuna and R. B. N. Santhosh, [An Evaluation of P-Delta Effect in High-Rise Building], International Journal of Science and Research (IJSR), Volume 7 Issue 6, June 2018.
  6. Parsa Heydarpour, Pedro F. Silva and Rigoberto Burgueño, [An Investigation on the Pushover Analysis Based Methods for Compensating the P-Delta Effects], International Journal of Structural and Civil Engineering Research Vol. 7, No. 1, February 2018.
  7. Thokala Brahmendra Rao, Dr M Janardhan and M.Venkata Narasaiah, [Study of P-Delta Effect in High- Rise Buildings with and without Shear Wall], INTERNATIONAL JOURNAL OF INNOVATIVE RESEARCH IN TECHNOLOGY, September 2022| IJIRT | Volume 9 Issue 4 | ISSN: 2349-6002.
  8. Dhangar Laxmi Balappa and Venu Malagavelli, [Pushover Analysis of High Rise Buildings with and without Bracings], International Journal of Civil Engineering and Technology (IJCIET) Volume 9, Issue 9, September 2018, pp. 759–767.
  9. Pavithra.S and Jegidha.K.J, [Analysis and Design of Tall Buildings using ETABS with P-Delta Analysis], International Journal of Engineering and Techniques - Volume 7 Issue 6, November 2021.

Publication Details

Published in : Volume 7 | Issue 4 | July-August 2023
Date of Publication : 2023-08-10
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 102-114
Manuscript Number : IJSRCE237412
Publisher : Technoscience Academy

ISSN : 2456-6667

Cite This Article :

Shubham Parashar, Hariram Sahu, "Analysis of a High-Rise Building Frame Considering Lateral Load Using Analysis Tools", International Journal of Scientific Research in Civil Engineering (IJSRCE), ISSN : 2456-6667, Volume 7, Issue 4, pp.102-114, July-August.2023
URL : https://ijsrce.com/IJSRCE237412

Article Preview

Contact Us

  • Address : 3 & 4, Sterling Plaza, Indira Circle, 150 Feet Ring Road, Rajkot-360005, Gujarat, India