Comparative Study on Asphalt Mixture with Nano Materials and Nano Particles

Authors(3) :-Megha Rani Sahu, Pradeep Kumar Nirmal, Lokesh Singh

Pavement materials are crucial factors affecting pavement durability. Now-adays, there is dire necessity for roads which are more stable and stronger. Due to weathering conditions and heavy traffic, the pavement surfaces are getting deteriorated by rutting, pot holes etc. Among them asphalt is the most sustainable pavement material for construction pavements and can be used for many applications including highways, airport runways, parking lots and drive ways. In order to provide effective durability than that of asphalt, in its original form it has been modified using Nano-materials known as modified asphalt. This research will deal with the advances in Nano-materials in hot mix asphalt and also addition of recronfibre and the comparison was made. With the addition of this Recronfibre, there is an improvement in the properties of bitumen like increase in stability value and decrease in the flow value, % of air voids etc. Recronfibre is an artificial material obtained from the polyester and which is also used as a secondary reinforcement for attaining tensile strength. It helps to resist the cracks obtained by the improper laying of pavement surface and heavy loaded vehicles. But whereas, the clay Nano-particles are the primary materials applying in asphalt construction adding Nano- particles like Nano clay, Nano silica and nanotubes in asphalts normally increase the viscosity of asphalt binders and improves the rutting and fatigue resistance of asphalt mixtures. From this the performance of asphalt when treated with Nano-particles and its sustainability compared to that of other pavement materials is examined and studied.

Authors and Affiliations

Megha Rani Sahu
Department of Civil Engineering, RSR Rungta College of Engineering and Technology, Bhilai, Madhya Pradesh, India
Pradeep Kumar Nirmal
Department of Civil Engineering, RSR Rungta College of Engineering and Technology, Bhilai, Madhya Pradesh, India
Lokesh Singh
Department of Civil Engineering, RSR Rungta College of Engineering and Technology, Bhilai, Madhya Pradesh, India

Modified Bitumen, Flexible Pavement, Polyester [Recron 3s] Fibber, Nano-materials, Rutting, and fatigue resistance.

  1. M. G. Al-Taher, Hassan D. Hassanin, Mokhtar F. Ibrahim and Ahmed M. Sawan, [Comparative Study of Performance of Modified Asphalt Mixtures Using Different Traditional and Nano Additives], International Journal of Scientific & Engineering Research Volume 10, Issue 4, April-2019, ISSN 2229-5518.
  2. Dheeraj N Kumar, Manjunath K. R and Santhosh T. K, [Comparative Study On Hot Mix And Warm Mix Asphalt Using Zycosoil And Densicryl Additives For BC Mix], International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 7, July - 2013, ISSN: 2278-0181.
  3. Varun and Tarun Gehlot, [Use of Nano-Clay in Asphalt Binder Modification], IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 15, Issue 1 Ver. III (Jan. - Feb. 2018), PP 25-30.
  4. Khalil Tabatabaie and Farhad Tabatabaie, [Assessment of Nanomaterials Use in Asphalt], International Journal of Constructive Research in Civil Engineering (IJCRCE) Volume 5, Issue 4, 2019, PP 6-12.

Publication Details

Published in : Volume 7 | Issue 2 | March-April 2023
Date of Publication : 2023-04-11
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 153-161
Manuscript Number : IJSRCE237216
Publisher : Technoscience Academy

ISSN : 2456-6667

Cite This Article :

Megha Rani Sahu, Pradeep Kumar Nirmal, Lokesh Singh, "Comparative Study on Asphalt Mixture with Nano Materials and Nano Particles", International Journal of Scientific Research in Civil Engineering (IJSRCE), ISSN : 2456-6667, Volume 7, Issue 2, pp.153-161, March-April.2023
URL : https://ijsrce.com/IJSRCE237216

Article Preview

Contact Us

  • Address : 3 & 4, Sterling Plaza, Indira Circle, 150 Feet Ring Road, Rajkot-360005, Gujarat, India