Manuscript Number : IJSRCE20461
Review on Pushover Assessment of symmetric multi-storeyed building and Its Modelling using SAP 2000 Software
Authors(2) :-Bablu Mansuri, Prof. M C Paliwal
An earthquake is the result of an unexpected release of liveliness in the Earth’s shell that creates seismic emission. It influences to the surroundings Structures. It damages the structure, which is indirectly kills peoples. Hence, supplementary worry while designing such structures is essential. Injure in reinforced concrete frame structure becomes huge if they are not design to perform elastically through earthquake. Some of the earthquake has defined that our countries structures i.e. reinforced concrete are highly weak during earthquake. For the general RC frame building in our country, it is lacking of strength be Cause of the ordinary miserable exercise of seismic structural plan and assemble in the country and huge shortage of brilliant professionals who can understand detailed seismic reinforcement workout. It is needed to take up the pushover analysis based approaches. Therefore, a typical analysis approach for determining stability against the lateral loads for a RC framed structure has been attempted in this study to evaluate the parameters to evaluate the safety of the structure, which reckons as a fundamental step in decision-making. A finite element model has been developed for the 6-storey building.
Bablu Mansuri
Department of Civil and Environmental Engineering, NITTTR, Bhopal, Madhya Pradesh, India
Prof. M C Paliwal
Pushover Analysis, Finite Element Method, Earthquake, Multistoried building, SAP2000.
- Murty, C. V. R, “Seismic Strengthening of RC Frame Building: The Formal Quantitative Approaches” Journal of Stucture Engineering., Vol. 35, No. 2, June-July 2008, pp 147-152.
- Pankaj Agarwal, S. K. Thakkar and R. N. Dubey, “Seismic performance of RC Building during Bhuj Earthquake in January 26, 2001 ” ISET Journal of Earthquake Technology, paper No . 424, Vol. 39, No. 3, September 2002, pp 195-217.
- A. R. Vijayanarayanan, Rupen Goswami and C. V. R. Murty, “Simple Linear Elastic Static Analysis Procedure to Attain Desire Collapse Mechanism for Moment Resisting Frames” 16th Word Conference on Earthquake, 16WCEE 2017, paper No . 1400, Santiago Chile, January 9th to 13th 2017, Registration Code: S-K1463204013.
- Manabu Yoshimura, “Nonlinear Analysis of a RC Building with a Soft First Storey Collapsed by the 1995 Hyogoken-Nanbu Earthquake” Cement and Concrete Composites 19 (1997) 213-221, 1997 Elsevier Science Ltd, PII: S0958-9465(97)00016-4.
- D. Guney and E. Aydin, “The Nonlinear Effect on Infill Walls stiffness to prevent Soft Storey Collapse of RC Structures” The Open Construction and Building Technology Journal, 2012.
- Jain, S.K. and Jaiswal, A., “Post-earthquake Handling of Building and Reconstruction Issues Emerging from the 2001 Bhuj Earthquake”, 7th Nat. Conf. On Earthquake Engg., July 2002, Boston, MA, USA 2002, pp 21-25.
- Dr. H. J. Shah and Dr. Sudhir K Jain, “Design Example of Six Storey Building”, A - Earthquake Codes IITK-GSDMA-EQ26-V3.0 Project on Building Codes, by Department of Applied Mechanics, M. S. University of Vadodara and Department of Civil Engineering, Indian Institute of Technology Kanpur.
- Murty, C. V. R, “Performance of Reinforcement Concrete Frame Building During 2001 Bhuj Earth quake.” 7th Nat. Conf. On Earthquake Engg., July 2002, Boston, MA, USA 2002, pp 21-25.
- Murty, C. V. R, “Seismic Strengthening of RC Frame Building: The Formal Quantitative Approaches” Journal of Stucture Engineering., Vol. 35, No. 2, June-July 2008, pp 147-152.
- UNIDO, “Repair and Strengthening of Reinforced Concrete, Stone and Brick-Masonary Building”, Vol-5, United National Industrial Development Organisation, Vienna, 1983.
- IS1893, ”Indian Standered Criteria for Earthquake Resisting Design of Structute”, BIS, New Delhi, 2004.
- IS1893, ”Indian Standered Criteria for Earthquake Resisting Design of Structute”, BIS, New Delhi, 2004.
- FEMAI440, “NEHRP Improvement of Nonlinear Static Seismic Analysis Procedures”, Federal Emergency Management Agency, Building Seismic Safety Councile, Washington DC, USA, June 2005.
- IS456, “Indian Standered Code of Practice for plain and Reinforced Concrete”, BIS, New Delhi, 2000.
- IS13920, “Indian Standered Code of Practice for Ductile Detailing of Reinforced Concrete Structure Subjected to Seismic Force”, BIS, New Delhi, 1993
Publication Details
Published in : Volume 4 | Issue 6 | November-December 2020
Date of Publication : 2020-12-30
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 01-05
Manuscript Number : IJSRCE20461
Publisher : Technoscience Academy
URL : https://ijsrce.com/IJSRCE20461
Article Preview