Manuscript Number : IJSRCE204526
Seismic Analysis of Modified Industrial Structure using Bracings and Dampers
Authors(3) :-Suyash Dubey, K. Divya, Lokesh Singh
Resistance of structures against earthquake plays an extensive role in construction industry. A structure should consist of strength, stability and ductility to accommodate both horizontal and vertical loadings. Horizontal loading leads to the production of sway and further results in vibration and storey drift. Strength and stiffness are two major keys for any structure to resist gravity and lateral loads. Provision of bracings or dampers to any structure contributes to lateral stability. After assigning dampers or bracings, the general system changes to lateral load resisting system (LLRS). The present work involves in proposing the suitability of type of damper or bracing for controlling the seismic activity on industrial structures in respective seismic zones II of India. Industrial structures also associate high dead load as it provides residence to heavy sized members. Therefore, this is necessary to investigate seismic response of buildings with various bracings and dampers to control vibration, lateral displacement and storey drift. Natural time period, frequency, roof displacements are the major parameters considered for observing response of structures. Response spectrum analysis of 3D industrial structure with distinct concentric bracings and dampers using SAP 2000 will be carrying in this research under respective base shear.
Suyash Dubey
P.G. Scholar, Department of Civil Engineering, R.S.R. Rungta, Bhilai, Madhya Pradesh, India
K. Divya
Assistant Professor, Department of Civil Engineering, R.S.R. Rungta, Bhilai, Madhya Pradesh, India
Lokesh Singh
Associate Professor, Department of Civil Engineering, R.S.R. Rungta, Bhilai, Madhya Pradesh, India
Steel Structure, Analysis, Industrial Frame, Drift, Seismic Zone
- Andrea belleri, simone labò, alessandra marini and paolo riva, [the influence of overhead cranes in the seismic performance of industrial buildings], frontiers in built environment, november 2017 | volume 3 | article 64.
- Amol v. Gowardhan, g. D. Dhawale and n. P. Shende, [a comparative seismic analysis of steel frame with and without bracings using software sap-2000], international journal of engineering research & technology (ijert), issn: 2278-0181, 2016 conference proceedings.
- Andrea godoy, frédéric barbier, charisis chatzigogos, nicolas besson, alfred thibon and martin ray, [comparative seismic analysis of overhead crane on steel frame carrying structure: evaluation of adequate equipment-structure interaction modeling], second european conference on earthquake engineering and seismology, istanbul aug 25,29, 2014.
- Ravali and p. Poluraju, [seismic analysis of industrial structure using bracings and dampers], international journal of recent technology and engineering (ijrte), issn: 2277-3878, volume-7, issue-6c2, april 2019.
- Dinesh kumar gupta and mirza aamir baig, [design of industrial steel building by limit state method], international journal of advance research, ideas and innovations in technology,issn: 2454-132x, impact factor: 4.295, (volume3, issue4), 2017.
- Habibur rahaman, faiyaz azam and mirza aamir baig, [seismic risk assessment of an industrial steel building], international journal of advance research, ideas and innovations in technology, impact factor: 4.295issn: 2454-132x, (volume 4, issue 5), 2018.
- Kavita k. Ghogare, [comparative study of seismic forces for the industrial structure], international journal for research in applied science & engineering technology (ijraset), volume 3 issue ii, february 2015 issn: 2321-9653.
- Kartik, sridhar r, kiran kumar k l, [study on dynamic analysis of steel structure with different types of bracings], 2016 ijsrst | volume 2 | issue 5 | print issn: 2395-6011 | online issn: 2395-602x.
- k.sangle, k.m.bajoria and v.mhalungkar, [seismic analysis of high rise steel frame building with and without bracing], 15 wcee 2012.
- Laxmi r. Gupta and samruddhi s. Thawari, [analysis of an industrial building], international journal for research in applied science & engineering technology (ijraset), volume 4 issue vii, july 2016, issn: 2321-9653.
- Mohammed idrees khan and khalid nayaz khan, [seismic analysis of steel frame with bracings using pushover analysis], international journal of advanced technology in engineering and science, volume no.02, issue no. 07, july 2014.
- Sri ramamurthy and b.n.nagababu, [modeling and analysis of gantrycrane with different materials using fem], issn: 2455-2631, international journal of scientific development and research (ijsdr), january 2019 ijsdr | volume 4, issue 1.
- Muhammed tahir khaleel and dileep kumar u, [seismic analysis of steel frames with different bracings using etsbs software], international research journal of engineering and technology, volume: 03 issue: 08 |aug -2016.
- Navya p and y.m manjunath, [structural behavior of industrial structurecsubjected to lateral loads], international journal of engineering research & technology (ijert), issn: 2278-0181, vol. 4 issue 05, may-2015.
Publication Details
Published in : Volume 4 | Issue 5 | September-October 2020
Date of Publication : 2020-10-30
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 238-249
Manuscript Number : IJSRCE204526
Publisher : Technoscience Academy
URL : https://ijsrce.com/IJSRCE204526
Article Preview