Manuscript Number : IJSRCE19328
Analysis of A High Rise Building Frame with Bracing and Shear Links at the External Members Using Analysis Tool Staad : A Review
Authors(3) :-Megha Chauhan, Pratiksha Malviya, Nitesh Kushwaha
Vertical shear-links in characteristic bracing systems, not similar to one located in the structure and can be easily changed or modify therefore, after the seismic effects, considering that other frame elements will remain elastic, only the vertical shear-links should be change, and then frame structure can function normally. a X type bracing system will be designed and fit with high accuracy and a small change in its characteristics reduce the ductility without increasing the stiffness, but unlike knee brace, vertical shear-link can be easily designed and implemented. In this review paper I am elaboration the past research work done related to lateral load resisting members, seismic forces and high rise building analysis using STAAD. Pro.
Megha Chauhan
P.G. Scholar, Department of Civil Engineering, M.I.T.S. Bhopal, Madhya Pradesh, India
Pratiksha Malviya
Assistant Professor, Department of Civil Engineering, M.I.T.S. Bhopal, Madhya Pradesh, India
Nitesh Kushwaha
H.O.D., Assistant Professor, Department of Civil Engineering, M.I.T.S. Bhopal, Madhya Pradesh, India
STAAD. Pro, Reinforced Concrete, Aluminum Plates, ETAB/SAP 2000, HSS
- E. Fehling, W. Pauli and J. G. Bauwkamp, “Use of vertical shear-Link in eccentrically braced frames” Earthquake Engineering , 10th World Conference 1992 Balkema , Rotterdam.
- Y. Mahrozadeh, “The application of shear panels in passive control conventional steel structures” Master's thesis, Faculty of Engineering, Tehran University, 2005, Tehran, Iran.
- S. M. Zahrai, “Behavior of Vertical Link Beam in Steel Structures. Building & Housing Research Center, BHRC Publication No.R-515, 2009.
- P. Dusicka, A. M. Itani and I. G. Buckle, “Evaluation of Conventional and Specialty Steels in Shear Link Hysteretic Energy Dissipaters.” Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver B.C, Canada, 2004.
- P. Dusicka, A. M. Itani, “Behavior of Built-Up Shear Links Under Large Cyclic Deformations.” Proceedings of the 2002 Annual Meeting of the Structural Stability Research Council, Structural Stability Research Council, Gainesville, FL.
- M. D. Engelhardt, E. P. Popov, “Experimental performance of long links in eccentrically braced frames.” J. Struct. Engrg., ASCE,1992, Vol. 118, No.11, PP. 3067-3088.
- American Institute of Steel Construction, AISC 2002, “Load and resistance factor design.” Manual of Steel Construction.
- International building code, IBC2003, Whitier, California.
- J. G. Boukamp, M. G. Vetr, “Design of Eccentrically Braced Test Frame With Vertical Shear Link Proceedings of the 2nd Int”, Con, On Earthquake Resistant Construction and Design, Berlin, June, 1994.
- M. G. Vetr, "Seismic behavior and design and analysis of crosswise braced frames with vertical shear joint" Journal of Earthquake Engineering and Seismology, Tehran, 1999.
- J. G. Boukamp, M.G. Vetr, “Design of Eccentrically Braced Test Frame with Vertical Shear Link.” Proceeding of the Second Int., Con. On Earthquake Resistant Construction and Design, Berlin, 1994.
- American Institute of Steel Construction, AISC 2002, “Load and resistance factor design.” Manual of Steel Construction.
- UBC, “Uniform Building Code”, International Conference of Building Officials, Whittier, Calif, 1997.
- AISC, “Seismic Provisions for Structural Steel Buildings.”, American Institute of Steel Construction, Chicago, IL, 1997
Publication Details
Published in : Volume 3 | Issue 2 | March-April 2019
Date of Publication : 2019-04-30
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 36-40
Manuscript Number : IJSRCE19328
Publisher : Technoscience Academy
URL : https://ijsrce.com/IJSRCE19328
Article Preview