Manuscript Number : IJSRCE19316
Post Tensioning Building Analysis Considering Seismic Zone V using Analysis Tools ETABS
Authors(2) :-Deepak Prajapati, Komal Bedi
In this fast-paced and competitive world, building sector is at the apex of the growth of any country. High-rise buildings are admired by every human being. Traditionally the construction of a building is done by RCC but inpresent world, construction of high rise buildings should be done by Post-Tensioning to resist lateral forces and enhancing structure strength. In RCC, the economic expenditure is very high in commercial and institutional buildings because of more material required in construction and hence, Post Tensioned building proves to be more economic and durable. Post-Tensioned building saves quantity of steel and concrete as compared to RCC and increases clear span in rooms. Through this study, the emphasis is to design a post-tensioned building using ETABS. ETABS stand for Extended Three-Dimensional Analysis of a building systems. The main purpose of this software is to design multistoried building in a systematic process which will be in accordance with Indian Standard design codes. In this comparative study we have consider a unsymmetrical plan of G+9 floors considering Wind load as per I.S. 1983-I:2016 & Black cotton soil. In this study comparative study is done with bare frame building structure considering same loading data to determine maximum storey displacement, axial forces, shear forces, maximum bending, storey drift, stiffness, overturning moment, displacement in x and z direction and cost analysis as per S.O.R.
Deepak Prajapati
Department of Civil Engineering, Alpine Institute of Technology, Ujjain Madhya Pradesh, India
Komal Bedi
Department of Civil Engineering, Alpine Institute of Technology, Ujjain Madhya Pradesh, India
Etabs, High rise building, analysis, post tensioning, cost analysis, S.O.R, SAFE, Drift.
- Ajdukiewicz and J. Mames, Prestressed concrete structures (in Polish: Konstrukcje z betonu spr??onego), Polski Cement, Cracow 2008.
- L. Bednarski, R. Sienko and T. Howiacki, “Estimation of the value of elastice modulus for concrete in existing structure on the basis of in situ measurements”, Cement-Wapno-Beton, 6/2014, pp. 396-404.
- Fib-Bulletin No. 31, Post-tensioning in building, Lausanne, February 2005. P. Marti, “Design of Concrete Slabs for Transverse Shear”, ACI Structural Journal, pp. 180-190, March-April 1990.
- A. E. Naaman, Prestressed Concrete Analysis and Design – Fundamentals, 2nd edition, Techno Press 3000, April 2004.
- PN-EN 1992-1-1 Eurocod 2: Design of concrete structures. Part 1-1: General rules and rules for building, p. 205, December 2008.
- R. Szydlowski and A. Smaga, “Untypical solution of prestressed concrete structure for hotel building” (in Polish: Nietypowe rozwi?zanie spr??onego ustroju no?nego w budynku hotelowym), Technical Conference KS2012 Prestressed Structures, Cracow, March 22-23, 2012.
- Applied Technology Council, Seismic Evaluation and Retrofit of Concrete Building, ATC-40, Volume 1and 2, Report NO.SSC 96-01, Seismic Safety Commission, Redwood City, 1996.
- Kadid and A. Boumrkik, Pushover analysis of reinforced concrete frame Structures,Asian journal of civil Engineering (BUILDING AND HOUSING) VOL. 9,NO.1 (2008).
- Nivedita N. Raut & Ms. Swati D. Ambadkar, Pushover Analysis of Multistoried Building, Global Journal of Researches in Engineering Civil and Structural Engineering Volume 13 Issue 4 Version 1.0 Year 2013.
- Federal Emergency Management Agency, NEHRP Guidelines for the Seismic Rehabilitation of Buildings, FEMA356, Washington, D.C., 2000
Publication Details
Published in : Volume 3 | Issue 1 | January-February 2019
Date of Publication : 2019-02-28
License: This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 29-34
Manuscript Number : IJSRCE19316
Publisher : Technoscience Academy
URL : https://ijsrce.com/IJSRCE19316
Article Preview